Instructions

Internal connectors and slots
List of onboard Features D3313-E D3313-G
Low Power Soft OFF
Internal Connectors
DIMM Sockets (DDR3 1066/1333/1600/1866, SO-DIMM) 2 2
1066/1333/1600/1866 MT/s m
odules
/ / / / / /-
PCI Express x16 Slot
PCI Express x1 Slot
--
PCI Slot (32 bit, 33 MHz,
Rev. 2.3)
--
Frontpanel Audio (9-pin, Intel standard header)
--
Specific socket for internal USB Stick
--
Serial (FIFO, 16550 c
ompatible) 1 1
Intrusion (Case Open)
onboard switch onboard switch
Feature Connector (General Purpose I/O)
--
USB 2.0 (~480 Mbi
t/s, USB 3.0 (4000 Mb/s)
1/0 1/0
Frontpanel (Power Switch, LEDs, Intel 10 pin header)
--
Dual channel LVDS / Backlight Control - / - - / -
Onboard Power
Output(+5V/2A,+12V/2A)fordrives
--
Onboard (internal input) DC-IN 19-24 V / 3 A
--
Power over Ethernet module (PoE) DC-IN 15 V (optional)
External C
onnectors
Audio In / Line Out (or driver configuration) / Microphone In
/ ##Head Phone Out (or driver configuration)##
1/1/1/1 1/1/1/1
PS/2 Mouse / Keyboard / /
USB 2.0 (
~480 Mbit/s, USB 3.0 (4000 Mbit/s)
4/2 4/2
Serial (RS232, FIFO, 16550 compatible)
22
DC-IN (external input) 19 V / 2 A (dependent on system
components 20 V / 3.25 A power supply necessary)
DC-I
N (external input) 19V: max. 4A
-
1) Maximum supported Transfer Rate per Port
2) Not supported by standard Power Supplies
Power Supply Requirements - for onboard components (worst case)
So
urce Voltage Maximal variation Mainboard current typical
D3313-E, D3313-G
Main Power Supply
19 V
+/-10 %
1A
Fujitsu