Mini-ITX D2963-S TechNotes V1.
Content • Safety Instructions à Page 2 • Mainboard Overview & Benchmarks à Page 3 • Display Options à Page 10 • Power Supply Features à Page 25 • Internal Connectors à Page 35 • System Monitoring à Page 48 • Temperature Reference Overview à Page 63 • Mainboard Power Consumption à Page 66 • Special Features à Page 68 • Operating System Support à Page 71 • OEM FTP download link for D2963-S ftp://ftp.ts.fujitsu.
Safety Instructions Do not connect or disconnect any cables or modules to or from any onboard connectors (except for the rear I/O connectors) until the mainboard is completely powered down. Any damage caused to the mainboard by misuse of the onboard connectors is excluded from the standard warranty. Fujitsu Technology Solutions cannot be held liable for any damage that results from incorrect use of any onboard connectors.
Overview • Onboard interfaces & connectors 3 TechNotes_D2963_V1.
Overview Onboard Components Stereo Audio In/Out Dual-LAN / 4 x USB 2.0 COM1 / DVI-I 2 x PS/2 PCB: 8-layer DC-IN (+ 19…24V) 4 TechNotes_D2963_V1.
Overview Onboard Components Chassis Fan Connector Intrusion Connector Compact Flash USB Stick Connector 2 x SATA II Drive Power Connector 2 x 2 USB Ports 1 x SO-DIMM LVDS-Backlight Frontpanel GPIO Port Processor CPU Fan PCI 24 Bit Dual Channel LVDS PCIe X1 Frontpanel Audio 19…24V DC-In Buzzer COM 2 5 TechNotes_D2963_V1.
Overview Onboard Components Mini PCI Express Connector (incl. USB support) Mechanical Lock for Mini PCI Express Card Sample for WLAN Minicard on D2963-S Mechanical Lock (supports fullsize cards only!) 6 TechNotes_D2963_V1.
Overview Benchmarks – SysMark 2004SE (Overall Rating) Intel Core 2 Duo T7200 / i945GM 2 GHz / 4MB L2 / 34W TDP Intel Core 2 Duo T2500 / i945GM 2 GHz / 2MB L2 / 31W TDP Intel Core 2 Duo T2400 / i945GM 1.83GHz / 2MB L2 / 31W TDP Intel Core Solo T1300 / i945GM 1.66GHz / 2MB L2 / 31W TDP Intel Celeron-M 420 / i945GM 1.6GHz / 1MB L2 / 27W TDP AMD Turion TL-68 / D2703-S 2.4GHz / 1MB L2 / 35W TDP . AMD Turion TL-56 / D2703-S 1.8GHz / 1MB L2 / 31W TDP . Sempron 3700+ / D2703-S 2.0GHz / 512KB L2 / 25W TDP .
Overview Benchmarks – 3DMark2006 Intel Core 2 Duo T7200 / i945GM 2 GHz / 4MB L2 / 34W TDP Intel Core 2 Duo T2500 / i945GM 2 GHz / 2MB L2 / 31W TDP Intel Core 2 Duo T2400 / i945GM 1.83GHz / 2MB L2 / 31W TDP Intel Core Solo T1300 / i945GM 1.66GHz / 2MB L2 / 31W TDP Intel Celeron-M 420 / i945GM 1.6GHz / 1MB L2 / 27W TDP AMD Turion TL-68 / D2703-S 2.4GHz / 1MB L2 / 35W TDP . AMD Turion TL-56 / D2703-S 1.8GHz / 1MB L2 / 31W TDP . Sempron 3700+ / D2703-S 2.0GHz / 512KB L2 / 25W TDP .
Overview Benchmarks – PCMark2005 Intel Core 2 Duo T7200 / i945GM 2 GHz / 4MB L2 / 34W TDP Intel Core 2 Duo T2500 / i945GM 2 GHz / 2MB L2 / 31W TDP Intel Core 2 Duo T2400 / i945GM 1.83GHz / 2MB L2 / 31W TDP Intel Core Solo T1300 / i945GM 1.66GHz / 2MB L2 / 31W TDP Intel Celeron-M 420 / i945GM 1.6GHz / 1MB L2 / 27W TDP AMD Turion TL-68 / D2703-S 2.4GHz / 1MB L2 / 35W TDP . AMD Turion TL-56 / D2703-S 1.8GHz / 1MB L2 / 31W TDP . Sempron 3700+ / D2703-S 2.0GHz / 512KB L2 / 25W TDP . .
Display Options • • • • • LVDS display & backlight inverter LVDS / Inverter connector details LVDS timings & screen resolutions LVDS cabling reference DVI, VGA, HDMI, LVDS 10 TechNotes_D2963_V1.
Display Options LVDS Display & Backlight Inverter Integrated Backlight, powered by Inverter Backlight Inverter LVDS Display (rear view) Integrated Backlight, powered by Inverter 11 TechNotes_D2963_V1.
Display Options LVDS Display & Backlight Inverter Integrated Backlight, powered by Inverter Backlight Inverter LVDS Display (rear view) Integrated Backlight, powered by Inverter LVDS Data / Power for display 12 TechNotes_D2963_V1.
Display Options LVDS Display & Backlight Inverter Integrated Backlight, powered by Inverter Backlight Inverter Control / Power for Inverter LVDS Display (rear view) Integrated Backlight, powered by Inverter LVDS Data / Power for display 13 TechNotes_D2963_V1.
Display Options LVDS Connector Details 1 LVDS Connector: Hirose DF13-40 (or compatible) 2 3 1 LVDS voltage selector jumper 3.3V (default) 5V (optional) Pin 3 2 1 Signal VCC 3.
Display Options Backlight Inverter Connector Details Backlight Inverter Connector: JST PHR-8 Ground Ground Backlight Brightness CTRL Power 5V Power 5V Backlight On/Off Control Power 12V Power 12V 8 1 GND GND tbd VCC VCC BL On/Off +12V +12V 1 2 3 4 5 6 7 8 max. load: 2A per pin! Note: Backlight Brightness Control: Provides a variable DC voltage between 0V and ~ 3.5V via an RC filter (2,2kOhm / 20uF).
Display Options LVDS Timing & Screen Resolution • Available default LVDS settings (BIOS Setup – Advanced – Peripheral Configuration) Detailed information (timing, pixels etc.) about each LVDS default setting is available in the related configuration files of the tool LVDS.EXE (see following page) max. LVDS screen resolution: 2048 x 1536 / 32bit color Note: Default BIOS Setting for LVDS is “Disabled”. Any BIOS Setup changes can be fixed as new default BIOS setting via BIONVD tool! ftp://ftp.ts.fujitsu.
Display Options LVDS Timing & Screen Resolution • DOS-Tool LVDS.EXE V1.01 allows to adjust LVDS timing parameters • Download link ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2963-S/IndustrialTools_D2963S/LVDS-Tool/ • Select one of the seven default configuration files as master file (Note: These default files are based on the seven BIOS Setup default LVDS settings) • Rename selected file to panel.txt • Edit file panel.
Display Options LVDS Cabling Reference • Sample cabling diagrams for following LVDS displays & related inverters are available: Display Size 10.4" 12.1" 12.
Display Options LVDS Sample Cabling for AuO-G150 19 TechNotes_D2963_V1.
Display Options DVI Output Digital (DVI) Monitor max. DVI screen resolution: 2560 x 1600 / 32bit color (Dual Link) 1600 x 1200 / 32bit color (Single Link, standard timings) 1920 x 1200 / 32bit color (Single Link, reduced blanking timings) 20 TechNotes_D2963_V1.
Display Options HDMI Output (w/o audio!) Digital (HDMI) Monitor via DVI/HDMI interface connector max. HDMI screen resolution: 1080i Note: Only HDMI graphics supported, no audio transmission! 21 TechNotes_D2963_V1.
Display Options VGA Output via Interface Connector Analog (VGA) Monitor via DVI/VGA interface connector max. VGA screen resolution: 2048x1536 @85Hz for 4:3 format 2560x1440 @75Hz for 16:9 format 2456x1536 @60Hz for 16:10 format 22 TechNotes_D2963_V1.
Display Options DVI & VGA via Splitter Cable Analog (VGA) Monitor and Digital (DVI) Monitor via DVI/VGA splitter cable Dual Independent Display Option (Note: DVI – single link only via splitter cable!) 23 TechNotes_D2963_V1.
Display Options DVI or VGA plus LVDS or Analog (VGA) Monitor or Digital (DVI) Monitor; plus LVDS Display Dual Independent Display Option max. LVDS screen resolution: 2048 x 1536 / 32bit color 24 TechNotes_D2963_V1.
Power Supply Features • 19-24V DC power supply • Drive power connector 25 TechNotes_D2963_V1.
Power Supply Features D2963-S offers two power supply options 1. Onboard 4 - pin power supply connector Pin 1, 2: GND Pin 3, 4: +19…24V DC-In Pin 3, 4: +19…24V DC-In Pin 1, 2: GND 26 TechNotes_D2963_V1.
Power Supply Features 2. External DC supply (AC adapter) 19…24V DC via external connector (AC adapter) GND (Ø 6.4mm) +19…24V DC (Ø 2.5mm) Appropriate DC plug for external AC adapter: Ø 2.5mm / 5.5mm Note: “Universal Plug” not allowed due to possible polarity mismatch! contact length ~ 10-11mm Angle plug or straight plug 27 TechNotes_D2963_V1.
Power Supply Features Requirements for 19-24V operation Nominal operating range 19 - 24V Max. operating range (19V -15%) - (24V +10%) Ripple / noise max. 400mV (PP) Max. input current: 5A The DC power supply input provides a capacitive load of 700µF which has to be covered by the AC adapter respectively the DC source during power ramp-up. Mainboard output current: The max.
Power Supply Features Power option for internal drives 19/24V Supply (internal) or 19/24V AC Adapter (external) Drive Power Connector 2.5” HDD Max. rating via Drive Power Connector: +5V/2A ; +12V/2A optional: SATA CD/DVD BLUE = power 29 TechNotes_D2963_V1.
Power Supply Features Power option for internal drives 19/24V Supply (internal) or 19/24V AC Adapter (external) Drive Power Connector 2.5” HDD Max. rating via Drive Power Connector: +5V/2A ; +12V/2A RED = data BLUE = power 30 TechNotes_D2963_V1.
Power Supply Features Drive Power Connector Drive Power Connector 1 VCC (+5V) 2 GND 3 GND 4 +12V max. 2A Note: Connector is compliant to standard floppy power supply connector. max. 2A 31 TechNotes_D2963_V1.
Power Supply Features Fujitsu DrivePowerCable Connector 1 (to mainboard) 1 2 3 4 Connector 2 (for SATA harddisk 2.5“ / 3.5“) Connector 3 (for slimeline SATA optical drive) L2=20cm L1 = 20cm 171822-4 AMP or equivalent Note: overall max. current via connector 1 limited to +5V / 2A and +12V / 2A 15 . . . . . . . . 1 COMAX C1212K32 or equivalent 654321 Molex SD-47328-100 or equivalent connector pinning Conn. 1 Conn. 2 Conn.
Power Supply Features Additional Power Output via Inverter Connector Prerequisite: No LVDS display attached to mainboard! The backlight inverter connector provides additional power for internal devices (+5V / +12V; max. 2A per pin!) 33 TechNotes_D2963_V1.
Power Supply Features Additional Power Output via Feature Connector Feature Connector provides additional power for internal devices: 3.3V 5V 12V 5Vaux max. 1.5 A per pin! Feature Connector 34 TechNotes_D2963_V1.
Internal Connectors • • • • • • Optional Devices via Feature Connector Internal USB/Audio Ports Compact Flash Second Serial Port Frontpanel Connector PCI / PCIe / Mini-PCIe Extension Slot 35 TechNotes_D2963_V1.
Internal Connectors Optional Devices via Feature Connector Feature Connector provides additional power for internal devices (3.3V; 5V; 12V; 5Vaux; max. 1A per pin!) 8 bit 3.3V General Purpose Input/Output (GPIO) in order to attach any digital device (sample picture) IrDA Transceiver (sample picture) Feature Connector 36 TechNotes_D2963_V1.
Internal Connectors Feature Connector Details Feature Connector: CompuPack R-DRK2-20-S3-SMT 1 3 5 7 9 11 13 15 17 19 1 2 GPI/O_0 GPI/O_2 GPI/O_4 GPI/O_6 VCC_3.3V VCC_3.3V IrDA_Tx IrDA_Rx GND VCC_12V GPI/O_1 GPI/O_3 GPI/O_5 GPI/O_7 GND VCC_5Vaux GND GND VCC_5V VCC_12V 2 4 6 8 10 12 14 16 18 20 Note: Current max. 1.
Internal Connectors Internal USB/Audio Ports Connect internal ports to USB/ Audio frontpanel module (Note: 2 USB ports per connector) RED = USB BLUE = Audio Frontpanel Audio USB Ports 38 TechNotes_D2963_V1.
Internal Connectors Internal USB Ports – Miscellaneous Options Optional: Touchscreen Controller via USB USB Ports 39 TechNotes_D2963_V1.
Internal Connectors Internal USB Ports – Miscellaneous Options Optional: Touchscreen Controller via USB Optional: Attach USB Flash Disk Module (up to 8GB available) e.g. www.stec-inc.com USB Ports 40 TechNotes_D2963_V1.
Internal Connectors Compact Flash CF Card – inserted in socket on mainboard (IDE „Master“-Interface) 41 TechNotes_D2963_V1.
Internal Connectors Second Serial Port Note: Pinning according FTS standard! External I/O Bracket COM2 Connector 42 TechNotes_D2963_V1.
Internal Connectors Frontpanel Connector Frontpanel providing - Powerswitch - Power/HDD-LED - Reset-Switch Frontpanel Connector 43 TechNotes_D2963_V1.
Internal Connectors Frontpanel Connector Details 2 1 Power LED: 3.3V supply max. 10mA onboard 100R series resistor HDD LED: 5.0V supply max. 10mA onboard 330R series resistor Frontpanel Connector 10 (KEY) Reserved (NC) 9 8 PowerSwitch_GND ResetSwitch_P 7 6 PowerSwitch_P ResetSwitch_GND 5 4 Power_LED_GND HDD_LED- 3 2 Power_LED+ HDD_LED+ 1 Note: Pinning is compatible to Intel 10 pin header 44 TechNotes_D2963_V1.
Internal Connectors PCI Extension Slot - 32Bit, 33MHz, PCI Rev. 2.3 - Compliant to 3.3V / 5V devices - Supports up to two PCI master slots via risercards PCI Risercards offered by FTS Note: Third party risercards must not use any “Reserved”-pins of PCI connector! 45 TechNotes_D2963_V1.
Internal Connectors PCI Express Extension Slot - PCIe x1 - Provides the option to install customer-specific extension cards - Note: External connectors of PCIe x1 cards require appropriate aperture in chassis rear! 46 TechNotes_D2963_V1.
Internal Connectors Mini PCI Express Extension Slot (bottom side) Mini PCI Express Connector (incl. USB support) Mechanical Lock for Mini PCI Express Card Note: Mini card lock supports full length cards only! 47 TechNotes_D2963_V1.
System Monitoring • • • • Temperature Sensors and Fans SystemGuard: Fan/Temperature Monitor SilentFanConfig: Customize System Monitoring Temperature Reference Points 48 TechNotes_D2963_V1.
System Monitoring D2963-S: Fans FAN 1 (CPU Fan) FAN 2 (Chassis) Note: Fan1 PWM (4-wire) only! Fan2: PWM (4-wire) and voltage controlled (3-wire) possible. Selectable via BIOS Setup Note: Do not attach more than one fan per connector! 49 TechNotes_D2963_V1.
System Monitoring D2963-S: Temperature Sensors CPU Sensor (inside Processor) Sensor 2 (inside Northbridge) Sensor 1 (inside Super I/O) 50 TechNotes_D2963_V1.
System Monitoring D2963-S: BIOS Fan Settings BIOS Setup option for Fan2 Note: Default setting is PWM (4-Wire) Setting “3-Wire”: The default minimum operating voltage is set to ~ 6V; the maximum operating voltage (full speed) is 12V. Note: If a 3-wire fan is used while BIOS Setup is set to “4-Wire”, the fan will operate at full speed (=12V operating voltage)! 51 TechNotes_D2963_V1.
System Monitoring SystemGuard: Fan/Temperature Monitor • Windows-based Monitoring Tool • Download link to latest version: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Common-Mainboard-Tools/SystemGuard/ Note: Version 3.50 or higher recommended for D2963-S • SystemGuard offers several options like “LogFile- feature” and “No Adjustments- mode” Details are available here: ftp://ftp.ts.fujitsu.
System Monitoring D2963-S: SystemGuard Temperature Sensors Northbridge Sensor Super I/O Sensor Processor Sensor Sensor / Fan Matrix Factory default setting: - FAN1 (CPU) controlled by Processor temperature 1) - FAN2 controlled by all sensors Current Fan Speed 1) Note: Characteristics for FAN1 is always dependent on CPU temperature – fully controlled by the system BIOS.
System Monitoring SystemGuard – Sample for Customized Fan Settings Temperature Range for Sens1 adjusted Minimum fan speed within “green” range; fan speed increases within “blue” range Sensor / Fan Matrix Only Sensor 1 (Super I/O) controls Fan2 Current Fan Speed Min. fan speed (fan2) reduced Note: This specific setting is recommended if D2963-S is installed in the Fujitsu Industrial MiniITX Chassis. Download link for this setting: ftp://ftp.ts.fujitsu.
System Monitoring SilentFanConfig: Customize System Monitoring • Windows-based Configuration Tool ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2963S/IndustrialTools_D2963-S/SilentFanConfigManager/ • Use SilentFanConfig to adjust the required settings. • As result, SilentFanConfig creates a BIOS configuration file. Save file as "smco.in“ • Afterwards you have to use the DOS-tool "SMCO" to flash the new fan settings into the BIOS. • Copy smco.exe and smco.
System Monitoring D2963-S: SilentFanConfig (1) Basic Fan Settings Adjust minimum fan startup speed Enable/disable fan speed control 56 TechNotes_D2963_V1.
System Monitoring D2963-S: SilentFanConfig (2) Basic Sensor Settings Adjust related temperature settings 57 TechNotes_D2963_V1.
System Monitoring D2963-S: SilentFanConfig (3) Global Settings Adjust minimum fan speed (Condition for “Fan removed”) Adjust sensor / fan influence Note: Due to safety reasons the CPU sensor always influences Fan 1 (CPU)! 58 TechNotes_D2963_V1.
System Monitoring D2963-S: SilentFanConfig (4) Import/Export Settings Create configuration file “smco.in” for additional SMCO flash tool (DOS-based). Customized System Monitoring settings can be flashed permanently to system BIOS. 59 TechNotes_D2963_V1.
System Monitoring Thermography D2963-S 60 TechNotes_D2963_V1.
System Monitoring Thermography D2963-S (Front) 61 TechNotes_D2963_V1.
System Monitoring Thermography D2963-S (Rear) 62 TechNotes_D2963_V1.
System Monitoring Climatic chamber test D2963-S D2963-S with thermo couples for all critical components 63 TechNotes_D2963_V1.
System Monitoring Temperature Reference Points Operating Conditions: Circulating air max. 60°C Usage 24h / 7 days Inductors max. 90°C Inductors max. 90°C Voltage Regulators max. 90°C Northbridge Heatsink max. 75°C Inductor / Voltage Regulator max. 90°C Crystal max. 75°C Clock Synth.max. 85°C Southbridge Heatsink max. 80°C Audio Codec max. 75°C Battery max. 60/70°C 1) Super I/O max. 75°C 1) Note: Battery operation is specified in temperature range up to 60°C.
System Monitoring Temperature Reference Points Operating Conditions: Circulating air max. 60°C Usage 24h / 7 days Voltage Regulator max. 90°C Voltage Regulator max. 90°C Crystal max. 75°C Crystal max. 75°C COM Driver max. 90°C LAN Controller max. 80°C Reference Point Limit Temperatures (Component Surface) must not be exceeded! 65 TechNotes_D2963_V1.
System Monitoring Processor Excess Temperature Protection If the processor temperature exceeds the internal Alert temperature level (~ 100°C; exact level depends on processor), the onboard electronics forces the processor to throttle down (“ProcHot”) in order to reduce the power consumption and prevent the system from damage. The processor performance will be reduced to ~ 50%.
Mainboard Power Consumption • AC Mains Power Consumption 67 TechNotes_D2963_V1.
Mainboard Power Consumption AC Mains Power Consumption D2963-S1 D2963-S2 Sempron 200U, 1GHz single / max. 8W 1GB RAM, HDD 2.5” SATA, Win XP AC adapter E557-V55 @230V Athlon L325, 1.5GHz dual / max. 18W 1GB RAM, HDD 2.
Special Features • Mainboard Watchdog • Harddisk Security 69 TechNotes_D2963_V1.
Special Features Mainboard Watchdog • Watchdog feature provides secure system behaviour in case of software crash • System shuts down or • System reboots Example: Printer Server (unattended) - Specific SW application re-triggers watchdog timer every 10 seconds -If the printer software hangs, the re-trigger application will no longer be active, and the watchdog forces the system to reboot (Demo Application) - After reboot, printer software is available again Note: Detailed programming info about the Watch
Special Features Harddisk Security • Password Protection for Harddisk • Password Entry on each Boot or • Silent Boot from Protected Harddisk à Second option useful for unattended system to ensure OS boot w/o any user interaction Note: Harddisk protected by HDD password cannot be used any more if password gets lost. Keeps your SW IP secure within your system! Silent Boot - Option 71 TechNotes_D2963_V1.
Operating System Support • Windows ® XP / VISTA / Windows 7 • Windows® XP Embedded • Linux / Embedded Linux 72 TechNotes_D2963_V1.
Operating System Support Support for Windows® XP / VISTA / Windows 7 • Mainboard D2963-S is designed according to the Microsoft Guidelines for Windows XP, Windows VISTA and Windows 7 • MS certified drivers are available via OEM DU-DVD, OEM FTP Server and FTS Website 73 TechNotes_D2963_V1.
Operating System Support Support for Windows® XP Embedded • Conditions • Customer is familiar with XP Embedded & Target Designer / Component Designer • Customer creates specific XP Embedded SW installation at his own responsibility & risk • FTS provides Board Support Package (SLD files incl. drivers for D2963-S onboard components) • Drivers contain english language version • SLD files have no license restrictions • Complete BSP will be available for download: ftp://ftp.ts.fujitsu.
Operating System Support Support for Linux OS (preliminary) openSUSE 10.3, 32 Bit openSUSE 10.3, 64 Bit openSUSE 11.0, 32 Bit openSUSE 11.0, 64 Bit SUSE Linux Enterprise 10 SP2, 32 Bit SUSE Linux Enterprise 10 SP2, 64 Bit Fedora 9, 32 Bit Fedora 9, 64 Bit Red Hat Enterprise Linux 5.2, 32 Bit Red Hat Enterprise Linux 5.2, 64 Bit Debian Etch, 32 Bit (netinst) Debian Etch, 64 Bit (netinst) Debian Lenny, 32 Bit (netinst) Debian Lenny, 64 Bit (netinst) Ubuntu 7.1, 32 Bit Ubuntu 7.1, 64 Bit Ubuntu 8.
Operating System Support Support for Embedded Linux (preliminary) • FTS provides free demo BSP for Embedded Linux • Download link ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2963-S/Drivers_D2963-S/ 76 TechNotes_D2963_V1.
77 TechNotes_D2963_V1.
