user manual

Operation
If you wish to cha nge other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described below.
OSD menu functions
The OSD menu for analogue monitor operation is described below. During
digital operation some functions are not available, they are not needed be cau se
of the digital transmission technology being used.
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of th e dis
play
With this function you can cha
nge the brightness of the background lighting.
Yo u can see whether the ECO ope
rating mode is active under the bar for
displaying the brightness se
tting.
Contrast
Set the contrast of the d isplay
With this function you can modify the contra st of pale colours.
Black level
Set the brightness of th e display
With this function you modify the contrast of dark colours.
Auto level *
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed w ith the
SELECT / MENU
button.
* function n ot available in DV
I mode
If the contrast is set too hi
gh, bright surfaces can no longer be d istinguished from very
bright surfaces. If the con
trast is set too low, the maximum brightness will not be achieved.
18 A26361-K1333-Z220-1-7619, edition 1