user manual

C141-E110-02EN
1 - 6
Table 1.3 Current and power dissipation
Typical RMS current (*1) [mA]
+12 V +5 V
Model MPG3102AT
MPG3153AT
MPG3204AT
All Models
MPG3102AT
MPG3153AT
MPG3204AT
Spin up 1600
1800 peak
1600
1800 peak
570
600 peak
22.1 22.1
Idle (Ready) (*3) 230 270 460 5.1 5.5
R/W (On Track) (*4) 300 330 460 5.9 6.3
Seek (Random) (*5)
Seek/W/R
430 450 460 7.5 7.7
Standby 18 18 120 0.8 0.8
Sleep 18 18 120 0.8 0.8
Model
MPG3153AT MPG3102AT
MPG3204AT
MPG3307AT MPG3409AT
Energy efficiency (rank)(*6)[watt/GB]
0.332 (A) 0.249 (A) 0.179 (B) 0.134 (B)
*1 Current is typical rms except for spin up.
*2 Power requirements reflect nominal values for +12V and +5V power.
*3 Idle mode is in effect when the drive is not reading, writing, seeking, or executing any commands. A portion of the
R/W circuitry is powered down, the spindle motor is up to speed and the Drive ready condition exists.
*4 R/W mode is defined as 50% read operations and 50% write operations on a single physical track.
*5 Seek/W/R mode is defined as 33% seek operations, 33% write operations and 33% read operations.
*6 Energy efficiency based on the Law concerning the Rational Use of Energy indicates the value obtained by dividing
power consumption by the storage capacity. (Japan only)
Typical Power (*2) [watts]
Mode of Operation
MPG3307AT
MPG3409AT
MPG3307AT
MPG3409AT