user manual

Chapter 6 Settings Menu

> 6.8 Others

ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance

602

P2X0-0760-02ENZ0

4 Click the [Close] or [OK] button.

Either the [Close] or [OK] button will be displayed, depending on the device conditions.

■ The [Close] button is displayed under the following conditions:

• IP Address or Subnet Mask of the FST Port is changed

• This device cannot be connected to the destination, and so on

→ The screen is closed.

• When the IP Address or Subnet Mask of the ETERNUS DX400/

DX8000 series is changed, the network addr e s s ( I P A d d r e s s o r

Subnet Mask) of FST may also be changed.

• It is necessary to logon again, after setting is complete.