Technical data

Preparing for use
8 A26361-K1000-Z221-1-7619, edition 2
Connecting the monitor
► Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
► Plug the data cable into the monitor port of the device.
1
2
► Depending on your device configuration level, plug the monitor power cable into either the
system unit (1) or a grounded mains outlet (2).
!
The monitor power cable may only be connected to the device monitor socket if the
monitor current consumption is less than 1.5 A for 230 V or 3 A for 115 V. The values for
the monitor current consumption can be found in the technical data on the monitor or in the
operating manual for the monitor.