Operation Manual

Connecting external devices
Connecting external devices
Peripherals, seeDevice sDevices:Externaldevices,connecting
Under all circumstances, please obs erve the safety notes provided in
the "
Important not es", Page 3 chapte r.
Read the documentation on the external device before connecting it.
Do not connect or disconnect cables during a thunderstorm.
Do not pull o n the cable when disconnecting a cable. Always take hold of the actual plug.
Follow the steps below in o rder, when connecting or disconnecting
devices to your notebook:
Connecting devices to the notebook
Devices:
1. Turn off all power and equipment switches.
2. Remove power plugs from the mains outlets for all devices.
3. Connect all th e cables to the notebook and the external devices.
4. Plug all data communication cables into the appropriate ports for the data ne tworks.
5. Plug all power cables into the mains outlets.
Please note that connected external devices can discharge the battery of the
notebook if no ma ins adapter is connected to the port replicator.
Disconnecting devices from the notebook
Devices:
1. Turn off all power and equipment switches.
2. Remove power plugs from the mains outlets for all devices.
3. Unplug all data communication cables from the ports for the data networks.
4. Disconnect all the cables from the notebook and the ext ernal devices.
Information about the connections on your notebook can be found
in th e corre sponding EasyGuide.
46 A26391-K200-Z226-1-7619, edition 2