Operation Manual

Using your notebook
Device variant 2
ModuleDriveSecondbatteryWeigh tSaver
► Place the notebook on a flat surface.
Use the corresponding icon in the task bar to stop the module:
► Left-click on the icon.
► Select the module you want to stop and remove.
► Press the Enter key.

Wait for the dialogue box which tells you that it is now safe to remo ve the module.
3
2
1
► Fold th e m odule leve r in the direction of
the arrow (1) and hold it in place.
► Pull the module lever in the direction
of the arrow (2).

The module is unlocked.
► Carefully pull the module out of
the notebook (3).
Installing a module
Device variant 1
► Place the module into the module bay so that the contacts enter first.
► Push the module into the module bay until you feel it locking into place.
A26391-K200-Z226-1-7619 , edition 2 21