Operation Manual

Using your notebook

Device variant 2

► Slide the mod ule in the direction of

the arrow into the notebook (1) until it

you feel it lock in place.

Optical drive

Opticaldrive

You can replace your opti

cal drive with another module (e.g. drive or battery)

(see "

Module s (device -

dependent)", Page 19).

This product contains a

light emitting diode, classiﬁed in accordance with IEC

8251:1993: LASER CLAS

S 1, and must therefore not be opened.

Handling CD/DVDs

CD/DVD:

Observe the following guidelines when handling CD/DVDs:

• Avoid touching the surface of a CD/DVD. Hold CDs/DVDs by their edges!

• Always store CD s/D VDs in their cases. This will protect them from dust,

scratches and oth er damage.

• Protect your CDs/DVDs from dust, mechanical vibration and direct sunlight!

• Avoid storing a CD/DVD in areas subject to high temperatures or humidity.

You may use both 8-cm and 12-cm CDs/DVDs in the optical drive.

When using CDs/DVDs of poor quality vibrations and reading errors m ay occur.

CD/DVD indicator

CD/DVDi

ndicator

The CD/DVD indicator ﬂashes when a CD/DVD is inserted. The indicator goes out when

the drive is ready for reading. The indicato r lights up when the drive is being accessed.

You m ay only remove the CD/DVD when the indicator is dark.

If the CD/DVD indicator does not go out afte r inserting a CD/DVD, bu t i nstead

continues to ﬂash, this means that the drive cannot access the data carrier.

Either the CD/DVD is damaged or dirty or you are using a data

carrier that the drive cannot read.

22 A26391-K200-Z226-1-7619, edition 2