Technical data

System upgrades
74 A26361-K994-Z220-1-7619, Edition 2
► Side the carrier with SmartCard reader into the module for the SmartCard reader (1).
► Fasten the carrier with the screws (2) on both sides of the slide-in module.
► Install the module with the SmartCard reader in the same way as an accessible 5¼ inch drive
(see "
Installing an accessible 5¼ inch drive").
Removing a SmartCard reader
► Remove the module with the SmartCard reader in the same way as an accessible 5¼ inch
drive (see "
Removing an accessible 5¼ inch drive"). When you do so, make sure to re-install
the Weight Saver if you do not install a new drive.
1
1
2
2
► Remove the screws on both sides of the slide-in module (1).
► Slide the SmartCard reader out of the module (2).