Technical data

System upgrades
72 A26361-K994-Z220-1-7619, Edition 2
Removing a hard disk drive
► Open the casing (see "Opening the casing").
2
1
1
► Press the EasyChange rails in the direction of the arrows (1).
► Pull the hard disk drive out of the carrier (2).
► Pull the EasyChange rails off the hard disk
drive.
► If necessary, make the required settings on
the remaining hard disk drive.
► Close the casing (see "
Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.