Technical data

System upgrades
A26361-K994-Z220-1-7619, Edition 2 59
2
1
1
1
1
2
a
► Push the board into the slot (1) and into the board holder (2).
► Press the board into the slot so that the board is felt to engage and on graphic cards the lever
(a) on the board closes (2).
► If necessary, connect the cables to the board.
2
1
1
b
► Press the clips (1) from outside in the cut-outs on the case rear panel until the clips engage.
When doing so, make sure that you press the rail carrier (a) into the corresponding opening.
► Fold closed the locking slide (2).
► If you have removed the cross-piece, install it now (see "
Installing the cross-piece").
► Install the fan (see "
Installing the side fan").
► Close the casing (see "
Closing the casing").