Technical data

System upgrades
58 A26361-K994-Z220-1-7619, Edition 2
► Close the casing (see "Closing the casing").
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the BIOS Setup. If necessary, change the settings. Further information is provided in the
PCI board documentation.
Installing a long board
► Open the casing (see "Opening the casing").
► Remove the fan (see "
Removing the side fan").
► Remove the cross-piece if it is in the way (see "
Removing the cross-piece").
3
2
1
1
► Press on the clips (1) in the direction of the arrow and unhook them from the casing rear panel.
► Fold open the locking rail in the direction of the arrow (2).
► Remove the slot cover from the slot (3).
!
Do not discard the slot cover. For cooling, protection against fire and in order to comply
with EMC regulations, you must refit the slot cover if you remove the board.
► Take the new board out of its packaging.
► Make the required settings for the board.