Technical data

System upgrades
56 A26361-K994-Z220-1-7619, Edition 2
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings in
the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The slots 1, 3, 5 and 7 are suitable for low-profile cards with an adapter. The slots are
counted from the bottom to the top.
Removing a short board
► Open the casing (see "Opening the casing").
► Remove the fan (see "
Removing the side fan").
► Remove the cross-piece if it is in the way (see "
Removing the cross-piece ”).
► Disconnect the cables connected to the board.
3
2
1
1
► Press on the clips (1) in the direction of the arrow and unhook them from the casing rear panel.
► If the board in question is a graphics card, undo the catch.
► Fold open the locking rail in the direction of the arrow (2).
► Pull the board out of the slot (3).
► Place the board into appropriate packaging.
!
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.