Technical data

System upgrades
A26361-K994-Z220-1-7619, Edition 2 55
1
► Push the board into the slot (1).
► Press the board into the slot so that it engages.
► If necessary, connect the cables.
3
2
2
a
► Press the clips (2) from outside in the cut-outs on the case rear panel until the clips engage.
When doing so, make sure that you press the rail carrier (a) into the corresponding opening.
► Fold closed the locking slide (3).
► If you have removed the cross-piece, install it now (see "
Installing the cross-piece").
► Install the fan (see "
Installing the side fan").
► Close the casing (see "
Closing the casing").