Technical data

System upgrades

54 A26361-K994-Z220-1-7619, Edition 2

Installing a short board

► Open the casing (see "Opening the casing").

► Remove the fan (see "

Removing the side fan").

► Remove the cross-piece if it is in the way (see "

Removing the cross-piece ”).

► Press on the clips (1) in the direction of the arrow and unhook them from the casing rear panel.

► Fold open the locking rail in the direction of the arrow (2).

► Remove the slot cover from the slot (3).

Do not dispose of the slot cover. For cooling, protection against fire and in order to comply

with EMC regulations, you must refit the slot cover if you remove the board.

► Take the new board out of its packaging.

► Make the required settings for the board.