System Operating Manual CELSIUS H920
Congratulations on your purchase of an innovative product from Fujitsu. The latest information about our products, tips, updates etc. can be found on the Internet at: "http://www.fujitsu.com/fts/" For automatic driver updates, go to: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.
Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8) 80807 Munich, Germany Contact http://www.fujitsu.com/fts/ Copyright © Fujitsu Technology Solutions GmbH 2012. All rights reserved. Publication Date 11/2012 Order No.
CELSIUS H920 Operating Manual Innovative technology 7 Ports and operating elements 9 Important notes 12 First-time setup of your device 15 Working with the notebook 18 Security functions 48 Connecting external devices 57 Removing and installing components during servicing 63 Settings in BIOS Setup Utility 73 Troubleshooting and tips 75 Technical data 82 Manufacturer’s notes 85 Index 91
Remarks Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
Contents Contents Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ExpressCards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the card . . . . . . . . . . . . . . . . . . .
Contents Preparing to remove components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing and removing memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing a cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing memory modules . . . . . . . . . . . . . . . . . . . . . . . .
Contents Regulatory notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regulatory information for notebooks without radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DOC (Industry CANADA) notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC regulatory information for notebooks with radio device . . . . . . . . . . . . . . .
Innovative technology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorised access by using the powerful password properties.
Innovative technology Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
Ports and operating elements Ports and operating elements This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device.
Ports and operating elements Left panel 1 2 3 4 1 = Security Lock device 2 = DC input connector (DC IN) 3 = USB port (USB 3.0) 5 4 = Memory card slot 5 = SmartCard reader Right side 1 2 3 4 5 4 = USB ports (USB 2.
Ports and operating elements Underside 1 2 3 6 4 5 1 = Service compartment, hard disk 1 2 = Battery with SIM card slot under the battery 3 = Service compartment, hard disk 2 Fujitsu 4 4 = Ventilation slot cover 5 = Port for port replicator 6 = Memory service compartment 11
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. Safety notes Notes Safetynotes Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Energy saving Energysaving Energy Notes Switch the notebook off when it is not in use. Switch off external, connected devices if you are not using them. If you use the energy saving functions, the notebook uses less energy. You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment.
Important notes Notebook: transporting Protect the notebook from severe shocks and extreme temperatures (e.g. direct sunlight in a car). ► ► ► ► ► ► If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives. Switch the notebook off. Unplug the mains adapter and all external devices from the power socket. Disconnect the mains adapter cable and the data cables for all external devices. Close the LCD screen.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 12. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 16.
First-time setup of your device Selecting a location Selectinga location Mainsadapter Device Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch for wireless components to the ON position before switching on the device. When you switch on the device for the first time, the supplied software is installed and configured.
Working with the notebook Working with the notebook Notebook Notebook,operation This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 57 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page 12.
Working with the notebook Indicator Description Power-on indicator Indicator Power-onindicator • • The indicator is illuminated: The notebook is switched on. The indicator flashes (1 second on/1 second off): The notebook is in power saving mode. • The indicator is not illuminated: The notebook is switched off or is in Save-to-Disk mode.
Working with the notebook Indicator Description Num Lock indicator Num Lock Indicator The indicator is illuminated: The Num key has been pressed. The virtual numerical keypad is activated. You can output the characters indicated on the upper right of the keys. Caps Lock indicator CapsLock Indicator The indicator is illuminated: The Caps Lock key has been pressed. All the characters you type will appear in upper case.
Working with the notebook Keyboard Keyboardkeypad Numeric Buttons The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows.
Working with the notebook Key Description Backspace key The Backspace key deletes the character to the left of the cursor. Backspace Tab key The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key. Linefeed Enter Return Enterkey Caps Lock key The Caps Lock key activates the Caps Lock mode, and the corresponding icon is displayed in the Windows information area.
Working with the notebook Separate number block Numeric Separatenumeric Num Lock keypad keypad The keyboard of your notebook has a separate number block on the far right. Key combinations The following description of key combinations refers to functions when using Microsoft Windows. Some of the following key combinations may not function in other operating systems and with some device drivers. Key combinations are entered as follows: ► Press and hold the first key in the combination.
Working with the notebook Combination Description Increase screen brightness This key combination increases the brightness of the screen. Screenbrightness Fn+F7 Decrease volume This key combination reduces the volume of the integrated loudspeakers. Volume Fn+F8 Volume increase This key combination raises the volume of the integrated loudspeakers.
Working with the notebook Application keys Applicationkeys Your notebook is equipped with five application keys.
Working with the notebook Button Description Lock Workstation key This key allows you to lock your workstation. Mobility Center key This button starts the Mobility Center. E key The E key is a simple way of activating and deactivating power management functions (e.g. reduce screen brightness), see "Using the power-management features", Page 36. I key With the I key, you can obtain further information about your notebook.
Working with the notebook Touchpad and touchpad buttons Keep the touchpad clean. Protect it from dirt, liquids and grease. Touchpad Do not use the touchpad if your fingers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons. 1 = TouchStick 2 = Touchpad 3 = TouchStick buttons 4 = Touchpad buttons 5 = Fingerprint sensor The touchpad enables you to move the mouse pointer on the screen. The touchpad buttons allow you to select and execute commands.
Working with the notebook Dragging items ► ► ► ► Move the pointer to the item you wish to select. Select the desired object and hold down the left TouchStick/touchpad button. Drag the object to the desired position. Lift your finger from the touchpad. or ► Lift your finger from the TouchStick. The item will be moved. LCD screen Notes LCDscreen High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH.
Working with the notebook Webcam Webcam Depending on the device variant, a WebCam may be integrated in your notebook. Depending on the software used, you can use your Webcam to take pictures, record video clips or take part in web chats. • • • • The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam).
Working with the notebook Rechargeable battery Life,battery Battery Rechargeablebattery When not plugged into a mains socket, the notebook runs on its built-in battery. You can increase the life of the battery by caring for the battery properly. The average battery life is around 500 charge/discharge cycles. You can extend the battery life by taking advantage of the available energy saving functions.
Working with the notebook Removing a battery ► Prepare for removal, see chapter "Preparing to remove components", Page 64. 2 1 1 ► Press the two unlocking levers (1). ► Remove the battery from the battery compartment (2).
Working with the notebook Installing a battery 1 ► Position the battery at the edge. ► Push the battery into the battery slot until you feel it lock into place (1). ► Complete the removal, see chapter "Finishing component removal", Page 72. Optical drive Opticaldrive This product contains a light emitting diode, classification according to IEC 60825 1:2007: LASER CLASS 1, and must therefore not be opened.
Working with the notebook CD/DVD indicator CD/DVDindicator The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when the drive is ready for reading. The indicator lights up when the drive is being accessed. You may only remove the data carrier when the indicator is unlit. If the CD/DVD indicator does not go out after a data carrier has been inserted, but instead continues to flash, this means that the drive cannot access the data carrier.
Working with the notebook Manual removal (emergency removal) Emergencyremovalofdata carrier Manualremovalofdatacarrier CD/DVD: In the event of a power failure or damage to the drive, you can remove the data carrier manually. ► Switch your notebook off. ► Push a pen or a piece of wire (such as a paperclip) firmly into the opening (1). The drive tray is ejected. You can now pull the drive tray (2) out of the drive.
Working with the notebook ► Press and hold the lock of the ventilation slot cover (1) and remove it from its slot (2). ► Clean the dust chamber. 2 1 ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page 72.
Working with the notebook Using the power-management features Battery Power The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the notebook Second hard disk in RAID group (device-dependent) In order to use RAID, it is necessary to either deactivate or uninstall the ShockSensorUtility program. RAID (Redundant Array of Independent Disks, also know as ’disk array’) is a method of combining two hard disk drives into one logical unit. A disk array can be used advantageously to improve performance or alternatively to improve error tolerance (data protection).
Working with the notebook Memory cards Slot Your notebook is equipped with an integrated memory card reader. Observe the manufacturer’s instructions when handling the memory cards. Memory card Supported formats Your notebook supports the following formats: • • • Secure Digital (SDTM card) Memory Stick (MS) Memory Stick Pro Inserting the memory card ► Carefully slide the memory card into the slot. The label should be facing upward.
Working with the notebook ExpressCards ExpressCard Slot An ExpressCard slot enables operation of an ExpressCard/34 or ExpressCard/54. Consult the documentation supplied by the ExpressCard’s manufacturer and follow the instructions provided. Never use force when installing or removing an ExpressCard. Make sure that no foreign objects enter the ExpressCard slot. Inserting the card Keep the placeholder for the slot in a safe place. When you remove the card again, you must reinstall the place holder.
Working with the notebook Removing the card To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system). ► Press the edge of the card (1) so that the card protrudes a little from the notebook. ► Pull the card out of the slot (2). 1 2 ► Insert the card placeholder into the slot guide. ► Gently slide the card placeholder into the slot until you feel it click into place.
Working with the notebook SIM card A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or notebook to enable access to a mobile radio network in conjunction with an installed UMTS module. Follow the instructions supplied by the provider of the SIM card. The SIM card slot is located in the battery compartment and can only be accessed when the battery is removed.
Working with the notebook Wireless LAN / Bluetooth (device-dependent) / UMTS / LTE (device-dependent) The installation of a radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Switching the wireless components on and off Before switching on your device for the first time, the on/off switch for radio components must be in the "ON" position. ► Slide the ON/OFF switch into the "ON" position to activate the radio components.
Working with the notebook Setting up WLAN access • Requirement: A WLAN must be available and you must have the corresponding access information. Information on configuring the WLAN access can be found in the documentation for your operating system. Access via UMTS / LTE If you ordered an integrated UMTS / LTE module with your system, you can enjoy optimum reception and maximum energy efficiency without awkward cables or antennas. The optional UMTS / LTE module is ready for use straight away.
Working with the notebook Your Port Replicator (optional) Your Port Replicator is a device that enables you to quickly connect your notebook to your peripherals, such as a monitor, printer etc. The features offered by the Port Replicator include standard ports for monitor, audio, mouse and keyboard. You need only dock the notebook in order to use your peripheral devices.
Working with the notebook Connecting the notebook to the Port Replicator If you connect the notebook to the Port Replicator during operation, problems can occur. We recommend that you switch off the notebook beforehand. The mains adapter must be connected to the Port Replicator when the notebook is connected to the Port Replicator. We recommend that the notebook is not operated with the LCD monitor closed when the notebook is connected to the Port Replicator.
Working with the notebook Connecting the mains adapter to the Port Replicator 1 3 ► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (1). ► Connect the power cable to the mains adapter (2). ► Plug the power cable into the mains socket (3). 2 When the notebook is connected to a Port Replicator, the operating system creates a hardware profile for the "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output.
Working with the notebook Disconnecting the notebook from the Port Replicator Problems may occur if the notebook is removed from the Port Replicator during operation. We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Switch the notebook off. 1 ► Hold underneath the notebook with the fingers. ► Press on the Port Replicator with the thumbs and lift up the notebook (1).
Security functions Security functions Securityfunctions Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data.
Security functions Using the Security Lock Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu Technology Solutions recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.
Security functions Protecting BIOS Setup Utility (supervisor and user password) If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call the instructions onto the screen while you are setting up the password. BIOS SetupUtility The supervisor password and the user password both prevent unauthorised use of the BIOS-Setup-Utility.
Security functions Removing passwords To remove a password (without setting a new password) perform the following steps: User password Supervisorpassword Password ► Start the BIOS Setup Utility and go to the Security menu. ► Highlight the Set Supervisor Password or Set User Password field and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. You will be requested to enter a new password by the Enter New Password prompt.
Security functions Password protection for the hard disk Passwordprotection: The had disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Activating hard disk protection ► Call up the BIOS Setup and select the Security menu.
Security functions Boot from Removable Media With this BIOS feature, you can manage/control unauthorised booting of an operating system from external media (e.g. USB stick, USB CD-ROM drive etc.) We recommend that you configure the hard disk as the first boot medium in order to prevent access to your system by boot CDs and bootable media. The condition for this BIOS feature is that you have assigned at least the supervisor password. ► Call up the BIOS Setup and select the Security menu.
Security functions Virus Warning (device-dependent) This field checks the boot sectors of the hard disk drive to see if any changes have been made since the previous system start-up. If the boot sector has been changed since the previous system start-up (e.g. new operating system or virus attack), a warning is displayed on the screen. The warning will stay on the screen until you acknowledge the changes by clicking on Confirm or until you set the Virus Warning function to Disabled.
Security functions SmartCard reader Securityfunctions Securityfunctions, SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers. With the appropriate software you can use your SmartCard as an alternative to password protection, but also as a digital signature, for encrypting your e-mails or for home banking. We recommend that you always use two SmartCards.
Security functions Trusted Platform Module (TPM) (device-dependent) Trusted Platform Module TPM To use the TPM, you must activate the TPM in the BIOS Setup before the software is installed. The condition for this is that you have assigned at least the supervisor password (see "Security functions", Page 48). Enabling TPM • ► ► ► Requirement: You have assigned a supervisor password, see "Security functions", Page 48. Call up the BIOS Setup and select the Security menu.
Connecting external devices Connecting external devices Always refer to the safety information provided in "Important notes", Page 12 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices Connecting an external monitor An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator. Monitor output is limited to a maximum of two monitors at any one time (see "Key combinations", Page 23, section "Toggle output monitor").
Connecting external devices Connecting external devices to the serial port Devices Externaldevices Serialport Parallelport If you wish to operate devices via a serial port, then use the Port Replicator which is available as an option for your notebook. External devices (e.g. a printer or modem) can be connected to the serial port. ► Connect the data cable to the external device. ► Connect the appropriate data cable for the device to the serial port.
Connecting external devices Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbit/s. USB 2.0 has a data transfer rate of up to 480 Mbit/s. USB 3.0 has a data transfer rate of up to 5 Gbit/s.
Connecting external devices Connecting an external SATA hard disk (eSATA) An external SATA hard disk can be connected at the eSATA port. This allows you to expand the internal hard disk capacity as you wish. The length of the eSATA cable must not exceed 2 metres. Consult a specialist dealer for advice on which eSATA data cable is suitable for your external eSATA hard disk. Make sure that the hard disk has its own external power supply. The data transfer rate is up to 2,400 Mbit/s.
Connecting external devices Connecting external audio devices Microphone port/Line In Microphone,connecting Audioports Audiodevices,connecting The microphone port/Line In allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your notebook. ► Connect the audio cable to the external device. ► Connect the audio cable to the microphone port/Line In of the notebook.
Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components After consulting the Hotline/Service Desk, you may remove and install the components described in this chapter yourself.
Removing and installing components during servicing Preparing to remove components If you are going to remove or change system components, prepare for the removal as follows: Please observe the safety information in chapter "Important notes", Page 12. Remove the power plug from the mains outlet ! ► Switch the device off. The device must not be in energy-saving mode ! ► Close the LCD screen. ► Remove all the cables from the device. ► Turn the device over and place it on a stable, flat and clean surface.
Removing and installing components during servicing Removing a cover 1 2 ► Remove the screw (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separate from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). The memory module snaps upwards (2).
Removing and installing components during servicing Installing a memory module ► Insert the memory module with the contacts and the recess (a) facing the slot (1). ► Carefully push the memory module downwards until you feel it click into place (2). Memory module expansion 1 2 a Attaching the cover 2 1 ► Place the cover in the correct slot (1).
Removing and installing components during servicing Removing and installing the first hard disk Removing a cover ► Remove the battery (see Chapter "Removing a battery", Page 31). 1 2 1 ► Remove the screws (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separately from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2).
Removing and installing components during servicing Removing a hard disk 1 2 1 ► Remove the screws (1). ► Lift the hard disk out of the hard disk compartment (2). Installing a hard disk 2 1 2 ► Place the hard disk into the hard disk compartment (1). ► Tighten the screws (2).
Removing and installing components during servicing Attaching the cover 2 1 2 ► Place the cover in the correct mounting position (1). If you remove more than one component at the same time, keep the screws for the individual components separately from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. ► Tighten the screws (2). ► Insert the battery (see Chapter "Installing a battery", Page 32).
Removing and installing components during servicing Removing and installing the second hard disk Removing a cover ► Remove the battery (see Chapter "Removing a battery", Page 31). 2 1 1 ► Remove the screws (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separately from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2).
Removing and installing components during servicing Removing a hard disk 1 1 2 ► Remove the screws (1). ► Lift the hard disk out of the hard disk compartment (2). Installing a hard disk 2 2 1 ► Place the hard disk into the hard disk compartment (1). ► Tighten the screws (2).
Removing and installing components during servicing Attaching the cover 2 1 2 ► Place the cover in the correct mounting position (1). If you remove more than one component at the same time, keep the screws for the individual components separately from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. ► Tighten the screws (2). ► Insert the battery (see Chapter "Installing a battery", Page 32).
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Setup Configuration,BIOSSetupUtility Hardwareconfiguration settings,BIOSSetupUtility configuration The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The notebook is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Fault Tips Troubleshooting Follow the safety notes in the "Safety/Regulations" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the notebook off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Restoring the hard disk contents under Windows Operatingsystem,restoring Harddisk: You can use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities CD/DVD" to reinstall the operating system. The instructions are provided on the case of the Recovery CD. During the reinstall process your personal files and any installed programs will be deleted. We advise you to backup your files to an external hard drive, or CD / DVD disk before you start.
Troubleshooting and tips The LCD screen is difficult to read LCDscreen Cause Reflected glare Troubleshooting ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Screen output is set to the notebook’s LCD screen The external monitor’s power cable or data cable is not connected properly.
Troubleshooting and tips The notebook cannot be started Notebook Cause The battery is not installed correctly. Troubleshooting ► Check whether the battery is installed correctly in its compartment. ► Switch the notebook on. The battery is dead. ► Charge the battery. or ► Insert a charged battery. or The power adapter is not connected correctly. ► Connect the mains adapter to the notebook. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on.
Troubleshooting and tips The printer does not print Printer doesnotprint Cause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting ► Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). ► Check that the data cable connecting the notebook to the printer is properly connected.
Troubleshooting and tips Error messages on the screen Error messages message: onthescreen This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre.
Troubleshooting and tips Error message/cause Resolution Previous boot incomplete - Default configuration ► Press the F1 function key when prompted used Due to an error during the previous system to do so. boot, default values were used for certain settings. Check the settings in the BIOS Setup. Real time clock error ► Contact your sales outlet or our customer service centre. nnnnK Shadow RAM failed at offset: xxxx Failing ► Contact your sales outlet or our customer Bits: zzzz service centre.
Technical data Technical data Notebook Technicaldata Processor Main memory Intel Core i5, i7 and i7 Extreme Edition DualCore systems • 16 Gbyte DDR3 SDRAM • 2 slots that accept 2, 4 or 8 Gbyte modules QuadCore systems • • Electrical data Safety regulations complied with Protection class Maximum power consumption (notebook switched on with battery charging) LCD monitor Display diagonal Display adapter Chip Video memory (VRAM) Audio Sound chip Dimensions Width x Depth x Height (front/back) Weight with Wei
Technical data Microphone port/Line In Headphones port/Line Out USB port eSATA port Docking port Ambient conditions Environment class 3K2 Mechanical class 7M2 Temperature Operation Transportation 3.5 mm mono mini-jack 3.5 mm stereo mini jack 3 x USB 2.0, 1 x USB 3.0 1x 1x DIN IEC 721 DIN IEC 721 5 ℃ ... 35 ℃ -15 ℃ ... 60 ℃ Rechargeable battery For information on the batteries used in your device, please see "http://www.fujitsu-siemens.com/support".
Technical data Port Replicator (optional) Electrical data Safety regulations complied with Protection class Dimensions/weight Width x depth x height (front/back) Weight Ports LAN port VGA port DisplayPort Serial port Microphone port Headphones port USB port eSATA port Docking port Ambient conditions Environment class DIN IEC 721 Mechanical class DIN IEC 721 Temperature: Operation Transportation 84 CE, CB II 353 mm x 138 mm x 10/36 mm approx.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your notebook or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Declarations of Conformity Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx".
Manufacturer’s notes Regulatory information for notebooks without radio device Regulatoryinformation NOTICE: Changes or modifications not expressly approved by Fujitsu Technology Solutions could void this user’s authority to operate the equipment. Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Manufacturer’s notes This equipment includes automatic dialing capability. When programming and/or making test calls to emergency numbers: • Remain on the line and briefly explain to the dispatcher the reason for the call. • Perform such activities in off-peak hours, such as early morning or late evening. FCC rules prohibit the use of non-hearing aid compatible telephones in the following locations or applications: • • • • • • • • All public or semi-public coin-operated or credit card telephones.
Manufacturer’s notes consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. CAUTION: For safety, users should ensure that the electrical ground of the power utility, the telephone lines and the metallic water pipes are connected together. Users should NOT attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician.
Manufacturer’s notes For Authorized Repair Technicians Only CAUTION: For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Manufacturer’s notes Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Radio devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations.
Index Index A Acoustic error messages 79 Alt + Tab 24 Anti-theft protection 49 Application keys 25 Audio devices, connecting 62 Audio ports 62 B Back tab 24 Backspace 22 Bass loudspeaker (subwoofer) 40 Battery battery life 30 caring for and maintaining 30 charge level 30, 36 charging 30 self-discharge 30 storage 30 Battery status meter 30 BIOS Setup Utility calling 73 exiting 74 operating 73 protecting with password 50 settings 73 Bluetooth Switching off module 42 Switching on module 42 Bluetooth, safety n
Index Fn Fn Fn Fn Fn + F6 23 + F7 24 + F8 24 + F9 24 key 22 G Getting started 15 H Handling data carriers 32 Hard disk: restoring the contents 76 Hardware configuration 73 I Important notes 12 Incorrect date/time 76 Indicator Caps Lock 20 CD/DVD 19 Num Lock 20 Power-on indicator 19 Scroll Lock 20 Inserting a data carrier 33 K Keyboard 21 cleaning 14 L LCD screen cleaning 14 difficult to read 77 notes 28 reflected glare 77 remains blank 76 LCD screen is too dark Life, battery 30 Line feed 22 Loudspeaker
Index O Operating system activating system protection 51 cancel system protection 51 protecting with password 51 Operating system, restoring 76 Optical drive 32 P Packaging 15 Parallel port 59 Connecting devices 59 Settings 59 Password changing 50 entering 50 removing 51 Password protection 49 Password protection: hard disk 52 Peripheral devices connecting 57 disconnecting 57 Port Replicator Connecting a notebook 45 Power power consumption 36 power-management features Power-on indicator 19 Preparing for op
Index Touchpad 27 buttons 27 cleaning 14 disable 23 executing commands 27 moving the pointer 27 selecting an item 27 TPM 56 Transport Transport damage 15 Transportation 13–14 Travel, notebook 13 Troubleshooting 75 Trusted Platform Module 56 U USB ports 60 User password changing 50 entering 50 94 removing 51 Using the Kensington Lock Cable V VGA connection socket Volume decrease 24 increase 24 Volume control 40 W Webcam 29 Windows key 22 Wireless LAN Switching off module Switching on module Wireless LAN:
