System Operating Manual CELSIUS H700
Congratulations, you have decided to buy an innovative Fujitsu product. The latest information about our products, useful tips, updates etc. is available from our website: "http://ts.fujitsu.com" For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.
Copyright Fujitsu Technology Solutions 10/2010 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8) 80807 Munich, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. Subject to technical alterations. Delivery subject to availability. No warranty is offered or liability accepted in regard of the completeness, correctness, or current applicability of any data or illustrations.
CELSIUS H700 Operating Manual Innovative technology 7 Ports and operating elements 9 Important notes 12 First-time setup of your device 15 Working with the notebook 18 Security functions 55 Connecting external devices 65 Removing and installing components during servicing 72 Settings in BIOS Setup Utility 79 Troubleshooting and tips 81 Technical data 89 Manufacturer’s notes 92 Index 99
Microsoft, MS, Windows XP, Windows Vista and Windows 7 are registered trademarks of the Microsoft Corporation. Adobe Reader is a trademark of Adobe Systems Incorporated. MultiMediaCard is a registered trademark of Infineon Technologies AG Sony and Memory Stick are registered trademarks of Sony Electronics, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged.
Contents Contents Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the memory card . . . . . . . . . . .
Contents Connecting external audio devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microphone port / Line In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Headphone port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Declarations of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regulatory notices . . . . . .
Innovative technology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorised access by using the powerful password properties.
Innovative technology Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
Ports and operating elements Ports and operating elements This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device.
Ports and operating elements Left panel 1 1 2 3 4 5 = = = = = 2 3 4 5 6 DC input connector (DC IN) eSATA port FireWire port Microphone port Headphone port 6 7 8 9 = = = = 7 8 9 USB port ExpressCard slot PC card slots SmartCard reader Right side 1 2 3 1 = ON/OFF switch for radio components 2 = USB ports 3 = Kensington Lock 10 4 5 4 = Module bay with optical drive 5 = Eject lever for module Fujitsu Technology Solutions
Ports and operating elements Rear 1 2 3 4 1 = Kensington Lock 2 = Modem port 3 = VGA monitor port 5 6 4 = Serial port 5 = LAN port 6 = Display port Underside 2 1 3 2 6 5 1 = Hard disk service compartment 2 = Battery lock 3 = Rechargeable battery Fujitsu Technology Solutions 4 4 = Memory service compartment 5 = Port for port replicator 6 = Ventilation slot cover 11
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. Safety notes Notes Safetynotes Please note the information provided in the "Safety" manual and in the following safety notes. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Energy saving Energysaving Energy Notes Switch the notebook off when it is not in use. Switch off external, connected devices if you are not using them. If you use the energy saving functions, the notebook uses less energy. You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment.
Important notes Notebook: transporting Protect the notebook from severe shocks and extreme temperatures (e.g. direct sunlight in a car). ► ► ► ► ► ► If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives. Switch the notebook off. Unplug the mains adapter and all external devices from the power socket. Disconnect the mains adapter cable and the data cables for all external devices. Close the LCD screen.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 12. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 16.
First-time setup of your device Selecting a location Selectinga location Mainsadapter Device Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch for wireless components to the ON position before switching on the device. When you switch on the device for the first time, the supplied software is installed and configured.
Working with the notebook Working with the notebook Notebook Notebook,operation This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 65 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page 12.
Working with the notebook Indicator Description First battery indicator • The indicator lights up green: The first battery is charged to between 51% and 100% of maximum capacity. • The indicator slowly flashes green (1 second on/5 seconds off): The notebook is in suspend mode and power is being supplied by the first battery. The first battery is charged to between 51% and 100% of maximum capacity. • The indicator lights up orange: The mains adapter is connected and the first battery is being charged.
Working with the notebook Indicator Description Energy saving functions indicator • The indicator is illuminated: The energy saving functions are enabled (e.g. reduce screen brightness). • The indicator is not illuminated: The energy saving functions have been disabled. Drive indicator CD/DVDindicator Indicator The indicator is illuminated: The hard disk drive or the CD/DVD in the optical drive of the notebook is being accessed.
Working with the notebook Switching on the notebook ► Press on the unlocking lever (1). The monitor is unlocked. ► Lift up the LCD monitor (2). Notebook 2 1 ► Press the ON/OFF switch for about one second to switch the notebook on. The power-on indicator of the notebook lights up. Notebook: switching off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system properly (e. g.
Working with the notebook Keyboard Keyboardkeypad Numeric Buttons The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows.
Working with the notebook Key Description Backspace key The Backspace key deletes the character to the left of the cursor. Backspace Tab key The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key. Linefeed Enter Return Enterkey Caps Lock key The Caps Lock key activates the Caps Lock mode, and the corresponding icon is displayed in the Windows information area.
Working with the notebook Virtual numeric keypad Numeric Num Virtualnumerickeypad Lock keypad To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key. If you have switched on the virtual numeric keypad, you can output the characters shown on the upper right of the keys.
Working with the notebook Combination Description Sleep mode This key combination is used to activate the suspend mode (S3). Sleepmode Fn+F1 Enable/disable loudspeakers This key combination switches your notebook’s loudspeakers off and on. Loudspeakers Fn+F3 Switching the touchpad on/off This key combination enables and disables the touchpad. Loudspeakers Touchpad Fn+F4 Enlarge display This key combination enlarges the screen to the full-screen mode or switches it back to the normal mode.
Working with the notebook Ctrl + Halt current operation C Ctrl+C This key combination can be used to halt an operation instantly without clearing the keyboard buffer. Switch between open applications With this key combination you can switch between several open applications. Alt+Tab Ctrl + Alt + Del Windows Security/Task Manager This key combination opens the Windows Security/Task Manager window. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tabular stop.
Working with the notebook Application keys Applicationkeys Your notebook is equipped with five application keys. All application buttons are freely programmable, see "Programming the application keys", Page 28. E Button Description Lock Workstation key This key allows you to lock your workstation. Mobility Center key This button starts the Mobility Center. E key The E key is a simple way of activating and deactivating power management functions (e.g.
Working with the notebook Programming the application keys With the Application Panel you can assign various functions to the application keys. Windows XP You will find the Application Panel under Start - (Settings) - Control Panel - Additional Control Panel Options - Application Panel. Windows Vista and Windows 7: You will find the Application Panel under Start symbol - Programs - Lifebook Application Panel. Touchpad and touchpad buttons Keep the touchpad clean. Protect it from dirt, liquids and grease.
Working with the notebook Selecting an item ► Move the pointer to the item you wish to select. ► Tap the touchpad once or press the left-hand TouchStick/touchpad button once. The item is selected. Touchpad Executing commands ► Move the pointer to the field you wish to select. ► Tap the touchpad twice or press the left TouchStick/touchpad button twice. The command is executed. Touchpad Dragging items ► ► ► ► Move the pointer to the item you wish to select.
Working with the notebook LCD screen Notes LCDscreen High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.
Working with the notebook Webcam Webcam Depending on the device variant, a WebCam may be integrated in your notebook. Depending on the software used, you can use your Webcam to take pictures, record video clips or take part in web chats. • • • • The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam).
Working with the notebook Rechargeable battery Life,battery Battery Rechargeablebattery When not plugged into a mains socket, the notebook runs on its built-in battery. You can increase the life of the battery by caring for the battery properly. The average battery life is around 500 charge/discharge cycles. You can extend the battery life by taking advantage of the available energy saving functions.
Working with the notebook Removing a battery ► Prepare for removal, see chapter "Preparing to remove components", Page 73. 1 1 2 ► Press the two unlocking levers (1). ► Remove the battery from the battery compartment (2).
Working with the notebook Installing a battery 1 ► Position the battery at the edge. ► Push the battery into the battery slot until you feel it lock into place (1). ► Complete the removal, see chapter "Finishing component removal", Page 78. Module Modules Modulebay The design of your notebook enables the flexible use of notebook batteries and drives.
Working with the notebook Removing a module 1 2 WeightSaver Drive Module ► Pull the unlocking lever in the direction of the arrow (1). ► Now pull the module out of the module bay (2).
Working with the notebook Installing a module ► Place the module into the module bay so that the contacts enter first. ► Push the module into the module bay until you feel it locking into place. Optical drive Opticaldrive This product contains a light emitting diode, classified in accordance with IEC 8251:1993: LASER CLASS 1, and must therefore not be opened. Handling data carriers Handling Observe the following guidelines when handling data carriers: • • Avoid touching the surface of a data carrier.
Working with the notebook CD/DVD indicator CD/DVDindicator The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when the drive is ready for reading. The indicator lights up when the drive is being accessed. You may only remove the data carrier when the indicator is unlit. If the CD/DVD indicator does not go out after a data carrier has been inserted, but instead continues to flash, this means that the drive cannot access the data carrier.
Working with the notebook Manual removal (emergency removal) Emergencyremovalofdata carrier Manualremovalofdatacarrier CD/DVD: In the event of a power failure or damage to the drive, you can remove the data carrier manually. ► Switch your notebook off. ► Push a pen or a piece of wire (such as a paperclip) firmly into the opening (1). The drive tray is ejected. You can now pull the drive tray (2) out of the drive.
Working with the notebook ► Press and hold the lock of the ventilation slot cover (1) and remove it from its slot (2). ► Clean the dust chamber with a dry brush. 1 2 ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page 78.
Working with the notebook Using the power-management features Battery Power The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the notebook Memory cards Slot Your notebook is equipped with an integrated memory card reader. Observe the manufacturer’s instructions when handling the memory cards. Memory card Supported formats Your notebook supports the following formats: • • • Secure Digital (SDTM card) Memory Stick (MS) Memory Stick Pro Inserting the memory card ► Carefully slide the memory card into the slot. The label should be facing upward.
Working with the notebook Removing the memory card Memorycard In order to protect your data, always follow the correct procedure for removing the card outlined below. You can stop the memory card via the corresponding icon in the task bar: ► Left-click on the icon. ► Select the card you want to stop and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the memory card. ► On devices with card locking: Press on the storage card (1).
Working with the notebook PC cards and ExpressCards PC-card,seePCcard PCMCIA,seePCcard CardBus,seePCcard ExpressCard PCcard An ExpressCard slot enables operation of an ExpressCard/34 or ExpressCard/54. A PC card slot enables the notebook to operate one type I or type II PC card. Please read the documentation on the PC card and/or on the ExpressCard and follow the manufacturer’s instructions. Never use force when installing or removing a PC card or an ExpressCard.
Working with the notebook Removing the card Always remove the card according to the rules described below, to ensure that none of your data is lost. You can stop the card using the corresponding icon in the task bar: ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the card you want to stop and remove. ► Press the "Enter" key. Wait for the dialog box which tells you that it is now safe to remove the card.
Working with the notebook Integrated 56k modem 56k modem Modem Whether or not your device has a 56k modem depends on the device configuration you have ordered. The integrated 56k modem supports all data communication applications, such as: • Modem operation: High-speed downloads at up to 56,000 bit/s (V.9x). Downward-compatible to V.34 modems.
Working with the notebook Connecting notebook modem to telephone wall socket If you use a modem, incompatibilities with the local telephone system may result. This may result in poor performance, or the modem may not work at all. Check whether you need a country-specific telephone adapter (available as an optional accessory). The modem cable and the country-specific telephone adapter are not included in delivery. You can order these as an option.
Working with the notebook SIM card A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or notebook to enable access to a mobile radio network in conjunction with an installed UMTS module. Follow the instructions supplied by the provider of the SIM card. The SIM card slot is located in the battery compartment and can only be accessed when the battery is removed.
Working with the notebook Wireless LAN/ Bluetooth (device-dependent) / UMTS (device-dependent) The installation of a radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Switching the wireless components on and off Before switching on your device for the first time, the on/off switch for radio components must be in the "ON" position. ► Slide the ON/OFF switch into the "ON" position to activate the radio components.
Working with the notebook Setting up WLAN access • Requirement: A WLAN must be available and you must have the corresponding access information. Information on configuring the WLAN access can be found in the documentation for your operating system. Access via UMTS If you have ordered an integrated UMTS module with your system, you can enjoy the best reception and maximum energy efficiency, without any disruptive cables or aerials. The optional UMTS module is ready for use immediately.
Working with the notebook Your Port Replicator (optional) Your Port Replicator is a device that enables you to quickly connect your notebook to your peripherals, such as a monitor, printer etc. The features offered by the Port Replicator include standard ports for monitor, audio, mouse and keyboard. You need only dock the notebook in order to use your peripheral devices.
Working with the notebook Connecting the notebook to the Port Replicator If you connect the notebook to the Port Replicator during operation, problems can occur. We recommend that you switch off the notebook beforehand. The mains adapter must be connected to the Port Replicator when the notebook is connected to the Port Replicator. We recommend that the notebook is not operated with the LCD monitor closed when the notebook is connected to the Port Replicator.
Working with the notebook 2 1 ► Position the notebook so that it is in line with the back edge and positioning aid of the Port Replicator (1). ► Push the notebook onto the Port Replicator in the direction of the arrow (2) until it engages.
Working with the notebook Connecting the mains adapter to the Port Replicator ► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (1). ► Connect the power cable to the mains adapter (2). ► Plug the power cable into the mains socket (3). 1 3 2 When the notebook is connected to a Port Replicator, the operating system creates a hardware profile for the "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output.
Working with the notebook Disconnecting the notebook from the Port Replicator Problems may occur if the notebook is removed from the Port Replicator during operation. We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Switch the notebook off. 2 1 ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2).
Security functions Security functions Securityfunctions Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data.
Security functions Use Kensington Lock Your device comes with a Kensington Lock device for the Kensington MicroSaver. With the Kensington MicroSaver, a sturdy steel cable, you can help protect your notebook from theft. The Kensington MicroSaver is available as an accessory. ► Fit the Kensington MicroSaver on the device on your notebook.
Security functions Setting supervisor and user password ► Start the BIOS Setup Utility and go to the Security menu. ► Select the Set Supervisor Password field and press the Enter key. With Enter new Password: you are asked to enter a password. ► Enter the password and press the Enter key. Confirm new Password requires you to confirm the password. ► Enter the password again and press the Enter key. Changes have been saved is a confirmation that the new password has been saved.
Security functions Activating system protection ► ► ► ► Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key. Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key Select the Save Changes & Exit option under Exit. The notebook will reboot. You will be prompted to enter your password (the supervisor password).
Security functions Deactivating hard disk protection To cancel a password without setting a new one, proceed as follows: ► Call up the BIOS Setup and select the Security menu. ► Mark the Hard Disk Security field and press the Enter key. ► In the Drive0 area mark the Set Master Password field and press the Enter key. You will be initially requested to enter the old password by the Enter current Password prompt. You will then be requested to enter a new password by the Enter new Password prompt.
Security functions Owner Information (device-dependent) The BIOS feature Owner Information enables you to enter up to 80 characters of text which is displayed in the bottom left corner of the screen before the operating system boots up. You could use this feature for example to put your name and telephone number on the notebook in case it is lost or stolen. Requirements: • • You have been assigned at least the supervisor password. In the BOOT menu, the Boot time diagnostic screen option is set to enabled.
Security functions SmartCard reader Securityfunctions Securityfunctions, Depending on the device configuration level, your notebook is equipped with a SmartCard reader. SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
Security functions SmartCard as software protection (SmartCase™ Logon+) Together with a CardOS SmartCard, software like SmartCase™ Logon+ gives you the option of logging on with the SmartCard and entering your PIN. If the PIN is entered correctly, SmartCard is checked and the operating system is booted. The SmartCard must remain in the SmartCard reader during the entire work session. In addition, the software allows you to block your computer during breaks.
Security functions Trusted Platform Module (TPM) (device-dependent) Trusted Platform Module TPM To use the TPM, you must activate the TPM in the BIOS Setup before the software is installed. The condition for this is that you have assigned at least the supervisor password (see "Security functions", Page 55).
Security functions Enabling TPM • ► ► ► Requirement: You have assigned a supervisor password, see "Security functions", Page 55. Call up the BIOS Setup and select the Security menu. Mark the TPM Security Chip Setting field and press the Enter key. Select Enabled to activate the TPM. Once you have activated the TPM the Clear Security Chip option appears. Select Clear Security Chip to delete the holder in the TPM. By clicking on Enabled, all secret keys (e.g.
Connecting external devices Connecting external devices Always refer to the safety information provided in "Important notes", Page 12 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices Connecting an external monitor An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to the DisplayPort. Screen output is limited to a maximum of two monitors at any one time (see "Key combinations", Page 24, section "Toggle output screen"). VGAconnection socket Monitor Monitorport P Digital DisplayPort Analogue VGA monitor port ► Switch off the notebook and the external monitor.
Connecting external devices Connecting external devices to the parallel or serial port Devices Externaldevices Serialport Parallelport The notebook has one serial port. If you wish to operate devices at a parallel port, use the optional Port Replicator available for your notebook. External devices can be connected to the parallel or serial port (e.g. a printer or a modem). ► Connect the data cable to the external device.
Connecting external devices Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbit/s. USB 2.x has a data transfer rate of up to 480 Mbit/s. Additional information can be found in the documentation for the USB devices.
Connecting external devices Connecting an external SATA hard disk (eSATA) An external SATA hard disk can be connected at the eSATA port. This allows you to expand the internal hard disk capacity as you wish. The length of the eSATA cable must not exceed 2 metres. Consult a specialist dealer for advice on which eSATA data cable is suitable for your external eSATA hard disk. Make sure that the hard disk has its own external power supply. The data transfer rate is up to 2,400 Mbit/s.
Connecting external devices Connecting FireWire devices Connectingaudio devices FireWire FireWire: Videodevices,connecting External devices such as digital audio/video devices or other high-speed devices can be connected to the FireWire port. The FireWire port operates at a speed of up to 400 Mbit per second. FireWire devices are hot-pluggable. Therefore, the cables of FireWire devices can be connected and disconnected with the system switched on.
Connecting external devices Connecting external audio devices Microphone port / Line In Microphone,connecting Audioports Audiodevices,connecting The microphone port/Line In allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your notebook. ► Connect the audio cable to the external device. ► Connect the audio cable to the microphone port/Line In of the notebook.
Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components After consulting the Hotline/Service Desk, you may remove and install the components described in this chapter yourself.
Removing and installing components during servicing Preparing to remove components If you are going to remove or change system components, prepare for the removal as follows: Please observe the safety information in chapter "Important notes", Page 12. Remove the power plug from the mains outlet ! ► Switch the device off. The device must not be in energy-saving mode ! ► Close the LCD screen. ► Remove all the cables from the device. ► Turn the device over and place it on a stable, flat and clean surface.
Removing and installing components during servicing Removing a cover 1 2 ► Remove the screw (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separate from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). The memory module snaps upwards (2).
Removing and installing components during servicing Installing a memory module ► Insert the memory module with the contacts and the recess (a) facing the slot (1). ► Carefully push the memory module downwards until you feel it click into place (2). Memory module expansion 1 2 a Attaching the cover 2 1 ► Place the cover in the correct mounting position (1).
Removing and installing components during servicing Removing and installing the hard disk Removing a cover ► Remove the battery (see Chapter "Removing a battery", Page 33). 1 2 ► Remove the screw (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separately from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2).
Removing and installing components during servicing Removing a hard disk 1 2 ► Remove the screw (1). ► Lift the hard disk out of the hard disk compartment (2). Installing a hard disk 2 1 ► Place the hard disk into the hard disk compartment (1). ► Tighten the screw (2).
Removing and installing components during servicing Attaching the cover 2 1 ► Place the cover in the correct mounting position (1). If you remove more than one component at the same time, keep the screws for the individual components separately from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. ► Tighten the screw (2). ► Insert the battery (see Chapter "Installing a battery", Page 34).
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Setup Configuration,BIOSSetupUtility Hardwareconfiguration settings,BIOSSetupUtility configuration The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The notebook is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Fault Tips Troubleshooting Refer to the safety information in the "Safety" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the notebook off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Help if problems occur Should you at any time have a problem with your computer that you can’t solve yourself, in many cases you can quickly solve it by using the SystemDiagnostics program which is pre-installed on your computer. The SystemDiagnostics program is already installed on devices which were delivered with a Windows operating system. ► To start the SystemDiagnostics program, click on Startsymbol - Program - Fujitsu - SystemDiagnostics.
Troubleshooting and tips The notebook’s date or time is incorrect Summer Buffer Dateisincorrect Incorrectdate/time Timenotcorrect Time,daylightsavings battery,load time Cause Time and date are incorrect. Troubleshooting ► With the BIOS-Setup-Utility, you can set the date and time in the main menu. If the date and time are repeatedly incorrect when you switch on the notebook, the built-in battery that supplies the internal clock has failed. ► Please contact your sales outlet or our Hotline/Service Desk.
Troubleshooting and tips The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Screen output is set to the notebook’s LCD screen The external monitor’s power cable or data cable is not connected properly. Troubleshooting ► Switch the external monitor on. ► Press any key to continue. ► Adjust the brightness of the monitor.
Troubleshooting and tips The notebook cannot be started Notebook Cause The battery is not installed correctly. Troubleshooting ► Check whether the battery is installed correctly in its compartment. ► Switch the notebook on. The battery is dead. ► Charge the battery. or ► Insert a charged battery. or The power adapter is not connected correctly. ► Connect the mains adapter to the notebook. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on.
Troubleshooting and tips The printer does not print Printer doesnotprint Cause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting ► Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). ► Check that the data cable connecting the notebook to the printer is properly connected.
Troubleshooting and tips Error message/cause CMOS battery bad Resolution ► Contact your sales outlet or our customer service centre. If the error message occurs repeatedly, the buffer battery in the notebook is flat. System CMOS checksum bad - default configuration ► Switch the notebook off. used ► Switch the notebook on. The system configuration information is ► Press the function key F2 to access the incorrect. BIOS Setup. ► In the BIOS Setup, select the Exit menu.
Troubleshooting and tips Error message/cause System cache error - Cache disabled System timer error 88 Resolution ► Contact your sales outlet or our customer service centre. ► Contact your sales outlet or our customer service centre.
Technical data Technical data Notebook Technicaldata Device Processor Main memory Possible modules Electrical data Safety regulations complied with Protection class Maximum power draw (with the notebook switched on and the battery charging) LCD monitor Display diagonal CELSIUS H700 Intel Core i5, i7 Maximum 8 Gbyte DDR3 SDRAM 2 slots for 2 GByte or 4 GByte modules • Second battery • Second hard disk drive • Optical drive (Blu-Ray RE, Super Multi) • Weight Saver CE, CE!, EN55022, EN55024, EN301489, EN300
Technical data Ports VGA monitor port Display port Modem port (device-dependent) LAN port Serial port Microphone port/Line In Headphones port/Line Out FireWire port USB port eSATA port Docking port Ambient conditions Environment class 3K2 Mechanical class 7M2 Temperature Operation Transportation 15-pin socket 20-pin socket RJ11 socket RJ45 socket 9-pin connector 3.5 mm mono mini-jack 3.5 mm stereo mini jack 4-pin S400 4 x USB 2.0 1x 1x DIN IEC 721 DIN IEC 721 5 ℃ ... 35 ℃ -15 ℃ ...
Technical data Port Replicator (optional) Electrical data Safety regulations complied with Protection class Dimensions/weight Width x depth x height (front/back) Weight Ports LAN port VGA port DisplayPort Parallel port Serial port Microphone port Headphones port FireWire port USB port eSATA port Docking port Ambient conditions Environment class DIN IEC 721 Mechanical class DIN IEC 721 Temperature: Operation Transportation Fujitsu Technology Solutions CE, CB II 184 mm x 118 mm x 14/40 mm approx.
Manufacturer’s notes Manufacturer’s notes Energy Star Devices which are certified according to the Energy Star environmental mark help to save money and reduce the emission of greenhouse gases.
Manufacturer’s notes CE marking CEmarking CE marking for devices with radio component This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.
Manufacturer’s notes Regulatory information for notebooks without radio device Regulatoryinformation NOTICE: Changes or modifications not expressly approved by Fujitsu Technology Solutions could void this user’s authority to operate the equipment. Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Manufacturer’s notes This equipment includes automatic dialing capability. When programming and/or making test calls to emergency numbers: • Remain on the line and briefly explain to the dispatcher the reason for the call. • Perform such activities in off-peak hours, such as early morning or late evening. FCC rules prohibit the use of non-hearing aid compatible telephones in the following locations or applications: • • • • • • • • All public or semi-public coin-operated or credit card telephones.
Manufacturer’s notes consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. CAUTION: For safety, users should ensure that the electrical ground of the power utility, the telephone lines and the metallic water pipes are connected together. Users should NOT attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician.
Manufacturer’s notes For Authorized Repair Technicians Only CAUTION: For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Manufacturer’s notes Regulatory Notes and Statements Radio device, health and authorisation for use Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Radio devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations.
Index Index 56k modem 45 A A beep sounds every second 83 Acoustic error messages 86 Alt + Tab 26 Anti-theft protection 56 Application keys 27 Audio devices, connecting 71 Audio ports 71 B Back tab 26 Backspace 23 Bass loudspeaker (subwoofer) 44 Battery battery life 32 caring for and maintaining 32 charge level 32, 40 charging 32 self-discharge 32 storage 32 Battery status meter 32 BIOS Setup Utility calling 79 exiting 80 operating 79 protecting with password 56 settings 79 Bluetooth Switching off module
Index F Fault correction 81 Fingerprint sensor 55 configure 55 FireWire connecting devices FireWire: port 70 First-time setup 15 Fn + F1 25 Fn + F10 25 Fn + F3 25 Fn + F4 25 Fn + F5 25 Fn + F6 25 Fn + F7 25 Fn + F8 25 Fn + F9 25 Fn key 23 Full-screen mode 25 G Getting started 70 15 H Handling data carriers 36 Hard disk: restoring the contents 82 Hardware configuration 79 I Important notes 12 Incorrect date/time 83 Indicator Caps Lock 20 CD/DVD 20 Num Lock 20 Power-on indicator 18 Scroll Lock 20 Insertin
Index N Notebook before you travel 13 cannot be started 85 cleaning 14 stops working 85 switching off 21 switching on 21 transporting 13–14 using 18 Notebook, operation 18 Notes 12 boards 72 cleaning 14 disposal / recycling 92 energy saving 13 LCD screen 30 Safety 12 transport 13 Num Lock indicator 20, 24 Numeric keypad 22 see Virtual numeric keypad Power power consumption 40 power-management features Power-on indicator 18 Preparing for operation 16 Printer does not print 86 R Radio component: safety not
Index Summer time 83 Supervisor password changing 57 entering 57 removing 57 Switching on for the first time 17 System configuration 79 System expansion 73 see Adding memory 73 System settings, BIOS Setup Utility 79 T Tab key 23 Technical data Mains adapter 90 notebook 89 The radio connection to a network does not work 86 Time not correct 83 Time, daylight savings 83 Tips 81 Toggle output screen 25 Touchpad 28 buttons 28 cleaning 14 disable 25 executing commands 29 moving the pointer 28 selecting an item
