Datasheet

Data Sheet FUJITSU CELSIUS R930 Workstation
Page 4 / 9 www.fujitsu.com/fts/CELSIUS
Fujitsu recommends Windows.
Drives (optional) BD Triple Writer SATA slim (tray)
DVD-ROM
DVD Super Multi
MultiCard Reader 24in1 USB 2.0 3.5”
SCSI / SAS Controller RAID Contr BBU Upgrade for RAID 5/6 Ctrl
RAID 5/6 Ctrl. 6 Gbit/s 8 ports int. 512 MB Cache
RAID 0/1 Ctrl. 6 Gbit/s 8 ports int.
RAID 0/1 Ctrl. 6 Gbit/s 8 ports ext.
Interface add on cards/components
(optional)
WLAN 802.11 a/g/n (2x2), (dedicated regions only, not for Indonesia)
USB 3.0 PCIe x1
Serial Interface FH
Gigabit Ethernet PCIe x1, DS
eSATA Interface
Dual serial card PCIe x1
Dual 10 Gigabit Ethernet PCIe x8
Interface add on/component note 1x eSATA interface already on board
Base unit CELSIUS R930 CELSIUS R930 power
Mainboard
Mainboard type D3118
Formfactor proprietary
Processor Intel® Xeon® processor E5-2600 family
()
Chipset Intel® C602
Processor socket Socket R
Processor quantity maximum 2
Memory slots 16 (8 per processor) DIMM (DDR3) registered
Supported capacity RAM (max.) 512 GB
Memory notes In congurations with 4 GB and more the visible memory may be reduced to approximately 3.5 GB or less (for 32-bit
operating systems) and congurations with 8 GB the visible memory may be reduced to approximately 7.5 GB or less
(depending on system conguration).
Large memory may lead to long boot times.
When using a 32-bit operating system the maximum of memory might be 900 MB.
LAN 2x Built-in 10/100/1,000 MBit/s Intel® 82579 LM and Intel® 82574L
BIOS version AMI Aptio 4.6
BIOS features BIOS Flash EPROM update by software
Recovery BIOS
Unied Extensible Firmware Interface (UEFI)
Audio type On board
Audio codec Conexant CX20642
Audio features High Denition Audio
I/O controller on board
Serial ATA total 7
thereof SATA III 2
thereof eSATA 1
SATA RAID support 0, 1, 10, 5
SAS Controller type optional upgrade to 8 ports, Intel C606
SAS RAID support 0, 1, 10
Interfaces
Audio: in (rear) 1