Operating instructions

En-6
TEMPERATURE SET BACK TIMER
Temperature set back timer setting
1
Press the “SET BACK” button to change to the Set back
conrmation display.
The Set back operating time and the set temperature will
be displayed.
If there is no exist-
ing Temperature set
back setting, “- -”
will be displayed for
the temperature.
2
Press the “TIMER SET” button for 2 seconds or more.
3
z
Day setting
z
Operating time setting
1
3
2
4
Follow the same procedures to set the operating time
as those for the weekly timer. The “TIMER DELETE”
button is also used as described in the procedures for
the Weekly timer.
Example: When setting all days together
4
z
Temperature setting
Press the “SET TEMP. (
)” buttons to set the
temperature. (The temperature setting range is the
same as the range for the operation mode.)
Example: Operating time 15:00–22:00
24°C
24°C
28°C
Set back
temperature
ON OFF
Normal tem-
perature
5
Repeat steps 3 and 4.
Press the “TIMER SET” button for 2 seconds or more to
complete the Temperature set back timer settings.
Temperature set back timer operation
z
To start
Press the “SET BACK” button. The Set back conrmation
display appears for 5 seconds, and then the timer starts
automatically.
Example: Display during Temperature set back timer operation
(The operating time will not be displayed.)
z
To cancel
Press the “SET BACK” button, and then press the “TIMER
DELETE” button while the Set back conrmation display
is displayed. Even if the “SET BACK” button is pressed
again, the Set back timer will be cancelled.
NOTES
• The Set back timer only changes the set temperature, it
cannot be used to start or stop air conditioner operation.
• The Set back timer can be set to operate up to 2 times per
day but only 1 temperature setting can be used.
• The Set back timer can be used together with the On, Off,
and Weekly timer functions.
• The Set back operating time is displayed only in the Set
back conrmation display. (Refer to step 1 for the Set back
conrmation display.)
ECONOMY OPERATION
Instructions relating to heating (*) are applicable only to
Heating and Cooling model (Reverse Cycle).
Begin air conditioner operation before performing this proce-
dure.
To use the Economy operation
Press the “ECONOMY” button.
The Economy indicator will light.
Economy operation begins.
To stop the Economy operation
Press the “ECONOMY” button again.
The Economy indicator will go out.
Normal operation begins.
NOTES
About Economy operation
z
During the monitor period in the Auto mode, the air con-
ditioner operation will not change to Economy operation
even if Economy operation is selected by pressing the
“ECONOMY” button.
z
When Economy operation mode is operated, the room
temperature will be a little higher than the set-temp under
Cooling mode and lower than the set-temp under Heating*
mode. Therefore, the Economy mode is able to save more
energy than other normal modes.
9381622023-02_OM_EN.indd 6 23/08/2017 16:58:09