Operating instructions

En-3
To set the operation mode
z
Operation mode setting
Press the “MODE” button to set the operation mode.
If Dry mode is selected, the fan speed will be set to Auto.
(Auto) (Cool) (Dry) (Fan) (Heat*)
z
Room temperature setting
Press the “SET TEMP. (
)” buttons to set the room
temperature.
Temperature setting range
Auto ...................18 to 30 °C
Cool/Dry ............18 to 30 °C
Heat* .................16 to 30 °C
Lower Raise
z
Fan speed setting
Press the “FAN” button to set the fan speed.
(Auto) (High) (Medium) (Low) (Quiet)
Economy operation
Press the “ECONOMY” button to
start or stop Economy operation.
For details on the function, refer
to page 6.
Child lock function
Press the “DAY / DAY OFF”
button and “TIMER SET”
button simultaneously for 2
seconds or more to activate
the child lock function and
lock all of the buttons on the
remote controller. Press the
buttons again for 2 seconds or more to deactivate the child
lock function.
When the child lock function is activated, the
mark
appears. If any button is pressed during the child lock, the
“CL” display and mark will both ash.
Room temperature sensor selection
Press the “ECONOMY” button
for more than 2 seconds to select
whether the room temperature is
detected at the indoor unit or the
remote controller.
When the thermo sensor indicator appears, the room
temperature is detected at the remote controller.
NOTES
• If this function is locked, the location where the room tem-
perature is detected cannot be changed and the
mark ashes when the “ECONOMY” button is pushed for
2 seconds or more.
• This function is locked at the factory. In order to detect the
room temperature correctly, consult authorized service
personnel when using this function.
PREPARATORY OPERATION
Set the current day and time
1
Press the “TIMER MODE / CLOCK ADJUST” button for
2 seconds or more. The time indicator on the remote
controller will ash.
2
Press the “DAY” button and select the current day.
A appears around the selected day.
SU MO TU WE TH FR SA
3
Press the Set time ( )
buttons to set the current
time.
Press repeatedly to adjust
the current time in 1-minute
increments. Press and hold
to adjust the current time in
10-minute increments.
Example: Monday PM11:00
SU MO TU WE TH FR SA
4
Press the “SET BACK” button to switch between the 12-
and 24-hour time displays.
SU MO TU WE TH FR SA SU MO TU WE TH FR SA
5
Press the “TIMER MODE / CLOCK ADJUST” button
again to end.
OPERATION
Instructions relating to heating (*) are applicable only to
Heating and Cooling model (Reverse Cycle).
To start/stop operation
Press the “START/STOP” button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
9381622023-02_OM_EN.indd 3 23/08/2017 16:58:07