Operating instructions

En-2
K
Timer and Clock indicator
*1 These functions cannot be used.
#1 Can be used if set correctly during installation. Please
consult authorized service personnel when using this func-
tion.
FEATURES AND FUNCTIONS
Instructions relating to heating (*) are applicable only to
Heating and Cooling model (Reverse Cycle).
VERTICAL AIR FLOW
Comfortable airow spread to every corner of the room by
the wide vertical airow.
ECONOMY OPERATION
When Economy operation mode is operated, the room tem-
perature will be little higher than the set-temp under Cooling
mode and lower than set-temp under Heating* mode. There-
fore, the Economy mode is able to save more energy than
other normal mode.
AUTO CHANGEOVER
The operation mode (Cooling, Dry, Heating*) is switched au-
tomatically to maintain the set temperature, and the tempera-
ture is kept constant at all times.
WEEKLY TIMER
Use this timer function to set operating times for each day of
the week. Use the Day off setting to switch off timed opera-
tion for a selected day in the coming week. Because all days
can be set together, the weekly timer can be used to repeat
the timer settings for all of the days.
REMOVABLE INTAKE GRILLE
The indoor unit’s intake grille can be removed for easy clean-
ing and maintenance.
WIRED REMOTE CONTROLLER
The wired remote controller allows convenient control of
indoor unit operation.
WIRELESS REMOTE CONTROLLER (OPTION)
The optional wireless remote controller can be used.
When you use the wireless remote controller, there are the
following differences as compared with using the wired
remote controller.
[Additional functions for wireless remote controller]
• SLEEP timer
You can use both wireless and wired remote controller si-
multaneously, however, the functions for the wireless remote
control will be restricted.
• Timer operation
• SLEEP timer
NAME OF PARTS
Indoor unit
2
1
3
1
Air lter (in air intake grille)
2
Air ow direction outlet
3
Air intake grille
Remote controller
1
“START/STOP” button
2
“MODE” button
3
“FAN” button
4
Horizontal airow direction and Swing button*
1
5
Vertical airow direction and Swing button
6
“ECONOMY” button
7
“MAINTENANCE / FILTER RESET” button
#1
8
“SET TEMP. (
)” (temperature) button
9
“TIMER MODE / CLOCK ADJUST” button
<
“DAY / DAY OFF” button
A
“SET BACK” button
B
Set time (
) button
C
“TIMER DELETE” button
D
“TIMER SET” button
E
Operation lock indicator
F
Fan speed indicator
G
Operation mode indicator
H
Temperature indicator
I
Function indicator
Defrost indicator
Thermo sensor indicator
Economy indicator
Vertical swing indicator
Filter indicator
#1
J
Operation lamp
9381622023-02_OM_EN.indd 2 23/08/2017 16:58:06