User's Manual

71
The smartphone screen will change to “connected” and smartphone’s screen
will be displayed on the HMD screen. Miracast connection is complete.
Volumes/Brightness settings
■Volume settings
1 Select “Volumes” in “HMD home” screen.
Voice command: “Number four”
You may select by using the keyboard if the keyboard is connected.
2 Select item and change the volume.
Select an item by voice command “number one”, “number two” or
“number three” and use voice command “Volume up” and
”Volume down” to change the volume.
You may change the volume by pressing left or right key
if the keyboard is connected.