User's Manual

68
- The product will not be reconnected automatically to the smartphone once
the power is off or the communication is lost, even if the connection became
available again. It's necessary to operate from procedure 3 above.
- Miracast connection uses 2.4GHz band wireless LAN. If you are unable to
use 2.4GHz band wireless LAN or has radio wave interference, use
microUSB cable for wired connection. See page “Connecting a microUSB
cable” for how to connect. (→P.78)
When the product is connected to a smartphone by using Miracast,
the time and date on the product will synchronized to the time and date
on the smartphone.
■Connecting the keyboard and a smartphone(Bluetooth)
1 Turn on the keyboard.
Hold down the [Power] key until Bluetooth/power indicator light
turns on.
2 Press [Bluetooth] key on the keyboard.
Hold down the key until Bluetooth/power indicator light starts flashing.
It will change to pairing standby state.
3 Display menu from a home screen of the smartphone and
tap “system settings”.
4 Tap “Bluetooth”
Turn “ON” “Bluetooth” if it’s “OFF”.
Wait until the keyboard is recognized.