Operation Manual

Getting started
► Connect one of the c onne ctors of the data cable to the D-SUB socket or the DVI-D s ocke t or the
DP socket of the m onitor and secure the plug connection by tightening the retaining screw s.
The monitor automatically detects the input when only one signal source is connected.
► Insert one plug of the audio line in the AUDIO IN socket on the monitor
and ma ke sure it is properly engaged.
► Plug the power cable supplied into the power connector of the monitor.
► Plug the supplied USB cable into the U S B IN socket and the oth er end of
the cable into a USB socket of the computer.
Connect the USB keyboard and USB mouse directly to the PC, as the U SB connector
socket o f the monitor is switched off in energy-saving mode.
A lock (Security Lock) can be mounted in the security slot to protect the monitor
against theft. A Security Lock is not included with the monitor at delivery.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the
operating manual for your computer.
► Connect the data cable to the (active) m onitor port on the computer and secure
the plug-in connection by tightening the safety screws.
► Insert the other plug of the audio cable in the audio output of the computer.
► Plug the power connector of the m onitor into a properly grounded mains outlet.
► Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separat e graphics card is active as standard.
18 Fujitsu