Operation Manual

Operation
Activate/deactivate ECO operating mode
The power consumption of th e device c an be decre ase d by reducing
the brightness of the picture.
► Press the
ECO
/ button to switch the ECO operating mode on or off.

The message ECO Mode ein or ECO Mode off a ppears.
If the ECO operating mode is activated, the following O SD settings are changed:
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the ON/OFF button
The ON /O FF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press and hold the
ECO
/ and
INPUT
/ buttons at the same time for a few seconds.

The message Power
button locked / unlocked is displayed.
Proceed in the s
ame way to release the locked ON/OFF switch again.
Changing the m
onitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integ rated
OSD (On-Screen Display) menu.
The English menu names are used in the following description (default setting).
22 Fujitsu Technology Solutions