Operation Manual

Operation
Select OSD language
If one of the buttons is being pressed for the first time for the OSD menu, the
selection screen for the language is displayed:
► Press the
ECO
/ or the
INPUT
/ button to select the required language.
► Press the
MENU
/ button to confirm yo ur entries or the
AUTO
/
button to cancel the process.
After selecting the O SD language for the first time, you can cha nge
it at any time in the OSD.
Performing auto-adju
stment of the monitor
► Press the
AUTO
/ button for about 1 second.

The Auto Processing message appears
Picture quality and position are set to optimum values for you r system.
Selecting the input signal (D-SUB/DVI-D/DP)
► Press the
INPUT
/ buttontocalluptheInput select settings window.
► Press the
ECO
/ or the
INPUT
/ button to select the desired
monitor connection (VGA, DVI or DP).
► Press the
MENU
/ buttontoconfirm your selection o r the
AUTO
/ button to cancel the process.
This setting window can also be called up w he n the OSD m enu is locked.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised cha nges to the monitor settings.
► Press and hold the
MENU
/ button for a few seconds while you switch
on the m onitor using the ON /OF F switch.

The message OSD locked / unlocked is displayed.
Please proceed in the s ame ma nner to release the locked OSD menu again.
Fujitsu Technology Solutions 21