Operation Manual

Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• TFT display (Thin Film Transistor; active ma trix)
• minimal space requirement
s thanks to slim casing
• optimum ergonomic characteristics (totally distortion-free, excellent picture
definition and colour purity right into the co rners)
• high degree of brightne
ss and good contrast
• high resolution (1680 x 1050)
• presentation of u p to 1
6.7 million colours (in conjunction with an appropriate display adapter)
• automatic scanning of horizontal frequen cies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 56 to 76 Hz (absolutely flicker-free)
• Digital screen contr
oller with microp rocessor for storing 40 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient opera
tion via integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI com
patibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device
for swivel arm or a similar accessory
• Plug&Play capability
• digital video
inputs (DVI and DisplayPort) with HDCP
• power management for reducing power consumption when the c omputer is not in use
• Compliance w
ith the recommendations accord ing to TCO 6. 0
• the monitor fulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operat
ing manual contains important information you require to start up and run your LCD m onitor.
A graphics c
ard (display adapter) with a VGA interface or a digital graphics card with a DVI
or Display
Port interface is required to control the LCD monitor. The mon itor processes the
data suppl
ied to it by the graphics card. The graphics card or th e associated driver software
is respon
sible for setting the modes (resolution and refresh rate).
When putt
ing the monitor into operation for the first time , the screen display should be
optimal
ly adapted to the display adapter used and a d justed in acco rdance w ith y our
needs (s
ee chapter "
Changing the monitor settings", Page 21).
Target group
You don’t need to be an "expert" to perform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for the computer and in this man ual.
In the event of any problems, please contact your sales office or our Service Desk.
Fujitsu 5