Operation Manual

Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
button to switch the ECO operating mod e on or off.

The message ECO Mode on or ECO mode off appears.
If the ECO operating mode is activated, the following O SD settings are changed:
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Selecting the input signal (D-SUB/DVI-D/DisplayPort)
► Press the
INPUT
buttontocalluptheInput select setting window.
► Press the
/ bu tton or the / button to select the desired monitor
connection (VGA, DVI or DisplayPort).
► Press the
MENU
/ button to confirm or the
AUTO
/ button to cancel.
This setting window can also be called up when the OSD menu is locked.
Performing auto-adjustment of the monitor
This setting
is only possible with an a nalog VGA input.
► Press the
AUTO
button for about 1 second.

The Auto Processing message appears.
Picture quality and position a re set to optimum values for your system.
22 Fujitsu