Operation Manual

Your LCD screen...
Your LCD screen...
has a whole range of useful f eatures and functions, e.g.:
• TFT display (Thin Film Transistor; active matrix)
• minimal space requirement
s thanks to slim c asing
• optimum ergonomic characteristics (totally distortion-free, excellent picture
definition and colour purity right into th e corners)
• high degree of brightne
ss and good contrast
• high resolution (1920 x 1080)
• presentation of u p to 1
6.7 million colours (in conjunction with an appropriate display adapter)
• automatic scanning of horizontal frequencies from 3 0 to 82 kHz and refresh rates
(vertical frequencies) from 56 to 76 Hz (absolutely flicker-free)
• Digital screen contr
oller with microprocessor for storing 40 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient opera
tion via integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI com
patibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device
for swivel arm or a similar accessory
• Plug&Play capability
• Digital video
inputs (DVI and HDMI) with HDCP
• power management for reducing power consumption when the computer is not in use
• Compliance w
ith the recommendations according to TCO 6. 0
• the monitor fulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operat
ing manual contains important information you require to start up and run your LCD m onitor.
A graphics c
ard (display adapter) with VGA interface or a digital display adapter with DVI interface
or video si
gnal source with HDMI interface is required to control the LCD monitor. The monitor
processes
the data supplied to it by the display adapter. The display adapter or the associated
driver so
ftware is responsible for setting the modes (resolution and refresh rate).
When putt
ing the monitor into operation for the first time , the screen display should be
optimal
ly adapted to the display adapter used and adjusted in accordance with your
needs (s
ee chapter "
Changing the monitor sett ings", Page 21.
Target group
You don’t need to be an "expert" to perform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for the computer and in this man ual.
In the e ven t of any pro blems, please contact your sales office or our Service Desk.
5