Operation Manual

Operation
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness o f the display
With this function you can change the brightness of the background lighting.
Contrast
Set the contrast of the display
With this function you can modify t he contrast of pale colours.
Black level
Set the brightness o f the display
With this function you modify the contrast of dark colours.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
Thefunctionisexecutedwiththe
button.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Adjusting the picture size and position
Call the Image ad
just setting window
Phase
Eliminate picture disturbance
With this function you fine-tune your monitor to eliminate picture disturbance.
Clock
Set synchroni
sation
With this fun
ction you adjust the picture width to eliminate vertical picture
disturbance
s.
H-Position
Adjust the h
orizontal position
With this f
unction you move the picture to the left or to the right.
V-Positio
n
Adjust th
e vertical position
With this
function you move the picture up or down .
Expansi
on
Adjust t
he picture size
Full scr
een = selection of full screen mode
Keep as
pect = maximum picture size without distortion (only for PC image)
16:9 =
16:9 widescreen format (Video/TV picture only)
4:3 =4
:3 format (Video/TV picture only)
26 Fujitsu Tech nolo gy Solutions