Operation Manual

Operation
Softkeys
Switch to submenu
Start (with Auto level and Factory recall)
Navigation within a menu
Select option
Change value
Apply changes and return to main menu
Reject changes and return to main menu
Exit the OSD menu
Language selection
The OSD menu is available in various languages.
A language selection is displayed immediately after you switch the display on .
► Select your desired language.
You can change the language using the OSD Language function in the OSD Setup menu.
Performing auto-adjustment of the monitor
► Press the
AUTO
button for about 1 second.

The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting the input signal (D-SUB/DVI-D/DP)
► Press the
INPUT
button to open the Inpu t select setting window.
► Press the
button (upw ards arrow) or the button (dow nwards arrow) to
select the desired monitor connection (VGA, DVI or DP).
This setting window can also be c alled when the O SD menu is locked.
22 Fujitsu Tech nolo gy Solutions