Operation Manual

Getting started
Mounting t he monitor base
2
1
3
Do not remove the retaining splint before you have secured the base plate on
the monitor and have brought it into operating po sition.
► Insert the base plate on the foot (1).
► Guide the screw through the opening (2).
► Secure the base plate with the screw (3 ).
► Place the monitor in operating position.
Adjusting the height
The height of the monitor can be adjusted by approximately 110 mm.
► Remove the retaining splint on the rear of the height adjustment.
► Grasp the monitor with both hand s at the left and right edges of the
housing and move it up or down.
Adjusting the inclination
The in
clination of the monitor can be adjusted by -5° (forwards) and +35°
(back
wards) from its vertical position.
► Hold
the monitor with both hands on the left and right sides of the casing
and m
ove it to the desired angle.
14 Fujitsu Tech nolo gy Solutions