User Manual

En-10
OPERATING MANUAL
Cleaning and Care
CAUTION
•
• Before starting operation, make sure that the intake grille has been shut completely. Incomplete closing of the intake grille might have an
•
• Do not expose the indoor unit to liquid insecticides or hair sprays.
Daily care
•
• Do not use scouring cleanser, volatile solvents such as benzene or
thinner.
• Wipe the unit gently by using soft cloth.
Cleaning the intake grille
1
Open the intake grille in direction of the arrow
a
. While gently
pressing the left and right mounting shafts of the intake grille
outward
b
, remove the intake grille in direction of the arrow
c
.
2
Wash the intake grille gently with water or wipe it gently with a
soft cloth moisten with warm water.
Then wipe it with a dry and soft cloth.
3
While holding the grille horizontal, set the left and right mounting
shafts into the pillow blocks at the top of the panel
d
. To latch
each shaft properly, insert the shaft until it snaps.
Then close the intake grille
e
.
4
Press 4 places on the intake grille to close it completely.
1
pull out.
Hooks (2 places)
2
Remove dust with a vacuum cleaner or by washing.
After washing, allow to dry thoroughly in a shaded place.
3
making sure the two lower tabs are returned properly to their
holes in the panel.
Hooks (2 places)
(2) Close the intake grille.
•
shady place before reinstalling.
•
•
two weeks.
• Do not operate the air conditioner with the intake grille open.