Operating instructions

ManualsBrandsFujitsu ManualsDomestic AppliancesASGA24FMTB-U

En-3

NAME OF PARTS

OPERATION

TIMER

POWERFUL

Fig. 1 Indoor Unit

Fig. 2 Intake Grille Fig. 3 Operating Control Panel

Fig. 4 Indicator

Fig. 5 Outdoor Unit

Intake Grille (Fig. 2)

(1-1) Air Cleaning Filters (Optional)

• Located behind the Air Filter.

Operating Control Panel (Fig. 3)

(1-2) Front Panel

(1-4) Power Diffuser

(1-5) Right-Left Louver

• behind Air Flow Direction Louver.

(1-6) Air Filter

(1-3) Airﬂ ow Direction Louver

Indicator (Fig. 4)

• Pull both ends of the grille towards you to open it.

• Push down the grille and press the 4 locations

shown with the arrows.

(3-1) MANUAL AUTO button

• When the MANUAL AUTO button is pressed in for more than

10 seconds, the Forced Cooling operation will start.

• The Forced Cooling operation is used at the time of installation.

Only for authorized service personnel’s use.

• When the Forced Cooling operation starts by any chance, press the

START/STOP button to stop the operation.

(4-1) OPERATION Indicator (green)

(4-2) TIMER Indicator (orange)

• If the TIMER indicator lamp ﬂ ashes when the timer is operating, it

indicates that a fault has occurred with the timer setting

(See Page 16 AUTO Restart).

(4-3) POWERFUL Operation Indicator (green)

(4-4) Remote Control Signal Receiver

(5-3) Intake Port

(5-4) Pipe Unit

(5-5) Drain Hose

(5-1) Outlet Port

(5-2) Drain port

(bottom)