Operating instructions

En-8
● Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
● Turn off the electrical breaker.
● A fan operates at high speed inside the unit, and personal injury could result.
CARE AND MAINTENANCE
Installing the Air Filter
Be sure the fi lter is always installed in the inlet air grille of the indoor unit.
Filters can be purchased through your local dealer.
Cleaning the Air Filter
If dirt is allowed to collect in the air fi lter, the airfl ow will be reduced, leading to reduced performance, and increased operation noise.
Be sure to clean the fi lters regularly.
How to Cleaning
Use a vacuum cleaner to remove dust and dirt from the air fi lter, or wash in a synthetic detergent. After washing, dry in a shaded
place, then reinstall.
CAUTION!
● When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit
be inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.
● When cleaning the unit’s body, do not use water hotter than 40 °C, harsh abrasive cleansers, or volatile agents like benzene or
thinner.
● Do not expose the unit body to liquid insecticides or hairsprays.
● If the unit will not be operated for a period of one month or more, be sure to allow the inner parts of the unit to dry thoroughly, in
advance, by operating the unit in fan mode for half a day.
SYSTEM OPERATION
<Control Several Units with just one Remote Controller>
One remote controller can control up to 16 air conditioners.
All the air conditioners can be operated with the same setting.
When using, consult authorized service personnel.
Remote
controller
Unit No.1 Unit No.2 Unit No.3
Outdoor
unit
Indoor unit
9365751053_OM.indb 89365751053_OM.indb 8 28-Mar-18 11:37:3428-Mar-18 11:37:34