Operating instructions

En-5
OPERATION
Press the START/STOP button.
To start/stop operation
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Child lock function
Press the DAY (DAY OFF) button and TIMER SET button
simultaneously for 2 seconds or more to activate the child lock
function and lock all of the buttons on the remote controller.
Press the buttons again for 2 seconds or more to deactivate the
child lock function.
When the child lock function is activated, the
mark
ap-
pears. If any button is pressed during the child lock, the
CL
indicator fl ashes.
ECONOMY operation
Press the ECONOMY button to start or stop ECONOMY operation.
For details on the function, refer to page 10 .
Press the FAN button to set the fan speed.
●
Fan speed setting
Temperature setting range
AUTO ............................................... 18 to 30 °C
COOL/DRY ...................................... 18 to 30 °C
HEAT* .............................................. 16 to 30 °C
Lower Rise
Press the SET TEMP. buttons to set the room temperature.
●
Room temperature setting
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
To set the operation mode
●
Operation mode setting
AUTO
COOL
DRY
FAN
HEAT*
AUTO HIGH MED LOW QUIET
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
9374379781-03_OM.indb Sec1:59374379781-03_OM.indb Sec1:5 8/6/2018 2:37:27 PM8/6/2018 2:37:27 PM