Operating instructions

En-11
CLEANING AND CARE
●
Can be used if set correctly during installation. Please consult authorized service personnel when using this func-
tion.
• It lights on when it is time to clean the air fi lters.
After turning the power on.
Press the MAINTENANCE button for
2 seconds or more on the remote control.
The fi lter indicator will disappear.
Filter indicator Reset (A special setting)
●
When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit
be inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.
●
When cleaning the unit’s body, do not use water hotter than 40°C, harsh abrasive cleansers, or volatile agents like benzene or
thinner.
●
Do not expose the unit body to liquid insecticides or hair sprays.
●
If the unit will not be operated for a period of 1 month or more, be sure to allow the inner parts of the unit to dry thoroughly, in
advance, by operating the unit in fan mode for half a day.
CAUTION
●
Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
●
Turn off the electrical breaker.
●
A fan operates at high speed inside the unit, and personal injury could result.
●
Remove the dust from the air fi lters by vacuuming or washing them. After washing, allow the air fi lters to dry thor-
oughly in an area protected from sunlight.
●
Dust can be cleaned from the air fi lter either with a vacuum cleaner, or by washing the fi lter in a solution of mild deter-
gent and warm water. If you wash the fi lter, be sure to allow it to dry thoroughly in a shady place before reinstalling.
●
If dirt is allowed to accumulate on the air fi lter, air fl ow will be reduced, lowering operating effi ciency and increasing
noise.
Cleaning the Air Filter
9374379781-03_OM.indb Sec1:119374379781-03_OM.indb Sec1:11 8/6/2018 2:37:28 PM8/6/2018 2:37:28 PM