Air Conditioner User Manual

En-11
To select SWING Operation
Press the SWING button (Fig. 6 T).
The SWING Display (Fig. 7 b) will light.
Each time the SWING button is pressed, the swing operation will change in the
following order.
To stop SWING Operation
Press the SWING button and select STOP.
Airfl ow direction will return to the setting before swing was begun.
SWING OPERATION
Begin air conditioner operation before performing this procedure.
Up/down swing operation Left/right swing operation
Swing operation stops Up/down/left/right swing operation
About Swing Operation
● Up/down swing: Swing operation begins using the
following range according to the current airfl ow direc-
tion.
Airfl ow direction is 1–4 (for cooling, dry).
With the upper airfl ow-direction louver in the hori-
zontal position, the lower airfl ow-direction louver
moves (swings) to direct airfl ow to a wide area.
● Left/right swing: The airfl ow-direction louvers move
(swing) in the left/right airfl ow direction.
● Up/down/left/right swing: The airfl ow-direction louvers
move (swing) in both the up/down and left/right airfl ow
directions.
●
The SWING operation may stop temporarily when the
air conditioner’s fan is not operating, or when operating
at very low speeds.
●
If the SET button (Vertical) is pressed during the up/
down swing operation, the up/down swing operation
will stop and if the SET button (Horizontal) is pressed
during the left/right swing operation, the left/right
swing operation will stop.
9315345363_OM.indb Sec1:119315345363_OM.indb Sec1:11 9/16/2010 2:48:51 PM9/16/2010 2:48:51 PM