Technical data

Thanks to innovative techno log y
Second hard drive in RAID group
RedundantAr rayofIndependentDisk sRAID
Removal and installation of the second hard disk must only be performed by
authorised service agents of Fujitsu Siemens Computers GmbH. Unauthorised
removal and installation will invalidate your warranty.
For further information and addresses of our service partners, please
see "http://www.fujitsu-siemens.com/support".
RAID (Redundant Array of Independent Disks, also: Disk Array) is a procedure for
combining two hard disks to create a logical unit.
A so-called disk array can be used advantageously to improve performance or
alternatively to improve error tolerance (data protection).
Error tolerance is facilitated by means of data redundancy. If one drive malfunctions,
a different drive con tain s an exact copy of the data. This can prevent an operating
system from malfunctio ning or data from being lost.
The o perating system detects all hard disks in a disk array as a single physical
hard disk. The individual disk drives in a disk array are called "members". Member
conguration information is recorded in the reserved sector of the hard disk. With this
information the hard disk can be identied as a member.
There are usually a few methods by which hard disks can be combined. These methods
are referred to as d ifferent RAID levels. The different RAID levels represent different
performance and security levels as well as implementation costs.
Depending on the size of the hard disk, the process for c ombining two
hard drives to create a RAID group can take several hours. During this
time period, your screen will turn black.
For further information regarding the conguration of your RAID systems, please
see the Help function of your Intel
®
Matrix Storage Manager Program.
Intel
®
Call up Matrix Storage Manager and H elp function
To call up the In tel
®
Matrix Storage Manager program and the Help function, proceed as follows:
Choose Start - All Programs - Intel
®
Matrix Storage Manager - Intel
®
Matrix Storage Manager.
The programme is started.
In the upper menubar, click on Help.
The Help function for the Intel
®
Matrix Storage Manager program is called up.
10600969195, edition 1 English - 3