User Guide

Removing and installing components during servicing
A26391-K183-Z121-1-7619, edition 1 55
1
1
2
3
► Position the hard disk on the right side of the hard disk compartment and insert it in the hard
disk compartment.
► Slide the hard disk by the pulling aids (2) in the direction of the arrow (3).
► Fasten the screws (1)*.
1
► Place the cover on its mounting location.
► Fasten the cover with the screw (1).
► Install the battery (see "Removing and installing the battery").
► Turn the notebook over and place it on a flat surface.
► Reconnect the cables that you disconnected before.