Operation Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the notebook for use
- Working with the notebook
- Security functions
- Connecting external devices
- System Configuration Utility
- Troubleshooting and tips
- You have forgotten your User and/or Admin password
- Installing new software
- Restoring the hard disk contents under Windows
- The notebook's date or time is incorrect
- The LCD screen of the notebook remains blank
- The LCD display panel is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable (only under Windows)
- The notebook cannot be started
- The notebook stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Memory expansion
- Technical data
- Index
A26391-K126-Z120-1-7619 63
Memory expansion
!
The notebook must be switched off when installing/removing the memory modules, it
must not be in Suspend mode.
Install only memory expansions that satisfy the requirements and rules governing safety,
RFI and electromagnetic compatibility and relating to telecommunications terminal
equipment (see the chapter "Important notes").
Use only memory expansions which have been released for your notebook (128, 256,
and 512 Mbyte modules SO DIMM, DDR 226 MHz).
Never use force when installing or removing memory modules.
Make sure that foreign objects do not fall into the memory module compartment.
The main memory of your notebook can be expanded to a maximum of 1024 Mbyte with another
memory module. The notebook will not start without memory modules, as no fixed main memory is
installed.
Removing and installing memory extension
!
Please note the information provided in the "Notes on installing and removing boards and
modules" section in the chapter "Important notes".
Ê Switch off the notebook and all devices connected.
Ê Close the LCD screen so that it locks into place.
Ê Unplug the power adapter from the mains outlet.
Ê Remove the battery (see "Removing the battery").
Ê Disconnect all cables connected to the notebook.
Ê Place the notebook upside down on a flat surface.