Operation Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the notebook for use
- Working with the notebook
- Security functions
- Connecting external devices
- System Configuration Utility
- Troubleshooting and tips
- You have forgotten your User and/or Admin password
- Installing new software
- Restoring the hard disk contents under Windows
- The notebook's date or time is incorrect
- The LCD screen of the notebook remains blank
- The LCD display panel is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable (only under Windows)
- The notebook cannot be started
- The notebook stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Memory expansion
- Technical data
- Index
A26391-K126-Z120-1-7619 55
System Configuration Utility
In the System Configuration Utility you can set the system functions and the hardware configuration of
the notebook. The settings can only be changed via the keyboard.
When it is delivered, the notebook is set to factory default settings. You can change these settings
in System Configuration Utility. Any changes you make take effect as soon as you save and quit the
System Configuration Utility.
The following menus are provided in the System Configuration Utility:
Startup: for system settings as time, date, password and monitor selection
Processor: for processor settings
Memory: for settings for the image memory (Video RAM)
Disks: for drive settings
Components: for system settings such as ports and keyboard
Exit: for ending the System Configuration Utility
Starting the System Configuration Utility
Ê Restart the notebook (switching ON/OFF or warm boot).
The following display briefly appears on the screen during start-up:
<ESC> Diagnostic screen <F12> Boot Menu <F2> BIOS Setup <F6> Battery
learning
Ê When this message appears, press the key [F2].
i
If a password has been assigned:
Ê Enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator or contact our
Hotline/Help Desk.