Operation Manual

A26391-K126-Z120-1-7619 49
Connecting external devices
!
Under all circumstances, please observe the safety notes provided in the "Important
notes" chapter.
Read the documentation on the external device before connecting it.
Do not connect or disconnect cables during a thunderstorm.
Do not pull on the cable when disconnecting a cable. Always take hold of the actual plug.
Adhere to the order described in the following when you connect external devices to the
notebook or separate them from the notebook:
Connecting external devices to the notebook
1)
Turn off all power and equipment switches.
2)
Remove all power plugs from the mains outlets.
3)
Connect all the cables to the notebook and the external devices.
4)
Plug all data communication cables into the utility sockets.
5)
Plug all power cables into the mains supply.
Disconnecting external devices from the notebook
1)
Turn off all power and equipment switches.
2)
Remove all power plugs from the mains outlets.
3)
Unplug all data communication cables from the utility sockets.
4)
Disconnect all the cables from the notebook and the external devices.
Ports
i
If the notebook is connected to a Port Replicator, only use the ports on the Port
Replicator.