Operation Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the notebook for use
- Working with the notebook
- Security functions
- Connecting external devices
- System Configuration Utility
- Troubleshooting and tips
- You have forgotten your User and/or Admin password
- Installing new software
- Restoring the hard disk contents under Windows
- The notebook's date or time is incorrect
- The LCD screen of the notebook remains blank
- The LCD display panel is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable (only under Windows)
- The notebook cannot be started
- The notebook stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Memory expansion
- Technical data
- Index
Working with the notebook
38 A26391-K126-Z120-1-7619
Working with floppy disks
i
Follow the instructions supplied by the vendor of the floppy disks.
3
2
1
5
6
4
7
1 = Insertion direction
2 =
Label area
3 =
Write protection tab for a 1.44 Mbyte floppy disk
4 =
Identification of a 1.44 MB floppy disk or write protect switch on a 120 MB floppy disk
5 =
Eject button for inserted floppy disks
6 =
Disk is write-protected
7 =
Disk is not write-protected
To insert a diskette:
Ê Push the floppy disk into the drive in the insertion direction (1) until it engages. The label
should be facing upward.
To remove a diskette:
Ê Push the eject button (5).
Protect the floppy disk against being overwritten or erased
Ê Slide the write-protect slider into position (6). The hole is now visible.
Deactivate write protection
Ê Slide the write-protect slider into position (7). The hole is now covered.