Operation Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the notebook for use
- Working with the notebook
- Security functions
- Connecting external devices
- System Configuration Utility
- Troubleshooting and tips
- You have forgotten your User and/or Admin password
- Installing new software
- Restoring the hard disk contents under Windows
- The notebook's date or time is incorrect
- The LCD screen of the notebook remains blank
- The LCD display panel is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable (only under Windows)
- The notebook cannot be started
- The notebook stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Memory expansion
- Technical data
- Index
Working with the notebook
26 A26391-K126-Z120-1-7619
Ê Press function key [F6].
The learning cycle is started. When the learning cycle is ended, a corresponding message is
displayed.
Charging the battery
The battery indicator displays the remaining battery charge (see the section "Indicators"). When you
switch on the notebook, it takes a few seconds before the battery status is displayed.
You can charge the battery by connecting the notebook to the power adapter (see "Connecting the
power adapter").
The battery can only be charged when the ambient temperature is between 5°C and max. 35°C.
A battery will fully charge in approximately three hours in a notebook that is switched off.
Work in the battery mode until an acoustic warning prompts you to recharge and the battery
indicator begins to flash. The notebook battery should not be charged before this point.
If you do not connect the power adapter within approximately five minutes of the signals described
above, your notebook will automatically switch off.
Monitoring the battery charging level
The remaining battery charge is indicated by the battery symbol in the status indicator panel (see
the section "Indicators"). When you switch on the notebook, it takes a few seconds before the
battery status is displayed.
During mobile operation you can also use a "battery charge meter" for energy-saving monitoring
under Windows.
A battery icon is shown in the taskbar. When you position the cursor on the battery icon, the battery
charge level is displayed with a blue status bar. This blue bar progressively decreases as the battery
discharges.
100 80
60 40 20
You can also see the battery's charging state on
the battery itself.
There are five indicators next to the finger icon
on the battery telling you what percentage of the
battery is charged.
Ê Press the finger icon.
The corresponding indicator lights up.
Inserting and removing the battery
!
Only use batteries released for this notebook.
Never use force when inserting or removing a battery.
Make sure that foreign objects do not fall into the battery compartment.
Ê Switch the notebook off.
Ê Place the notebook on a flat surface.
Ê Close the LCD display panel.
Ê Turn the notebook over.