Operation Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparing the notebook for use
- Working with the notebook
- Security functions
- Connecting external devices
- System Configuration Utility
- Troubleshooting and tips
- You have forgotten your User and/or Admin password
- Installing new software
- Restoring the hard disk contents under Windows
- The notebook's date or time is incorrect
- The LCD screen of the notebook remains blank
- The LCD display panel is difficult to read
- The external monitor stays blank
- The external monitor is blank or the image is unstable (only under Windows)
- The notebook cannot be started
- The notebook stops working
- The mouse does not work
- The floppy disk cannot be written
- The printer does not print
- Acoustic warnings
- Memory expansion
- Technical data
- Index
Preparing the notebook for use
14 A26391-K126-Z120-1-7619
Ê Press the Suspend/Resume button to switch on the notebook (1).
The power-on indicator on the notebook
lights up.
!
After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never
switch the notebook off during the self-test.
Leave the external power adapter connected to your notebook during the initial
installation.
Once the installation has been started, the notebook must not be switched off!
During installation, the notebook may only be rebooted when you are requested to do so!
Ê During installation, follow the instructions on screen.
Consult the operating system manual if there is anything unclear about the requested input data.
i
If there is installed on your notebook a Windows operating system the "Drivers°&°Utilities"
CD is included in the delivery scope. You will find further information on the system,
drivers, utilities, updates, manuals etc. on this "Drivers & Utilities" CD.
If there is installed on your notebook the Linux operating system you will find further
information, drivers etc. in the internet under http://www.fujitsu-siemens.com/Linux.