Technical data

Preparing your notebook for use
Switching the notebook on for the first time
Switchingonforthefirsttime
We recommend that the notebook is supplied with po w er through
the mains adapter during this procedure.
When you switch your notebook on fo r the first time, the supplied software
is installed a nd configured. Because this installation procedure must not be
interrupted, you should set aside enough time for it to be fully completed and
connect the notebook to the mains outlet using the mains adapter.
During installation, the notebook must only be rebooted when you are requested to do so!
You will be prompted to create a backup copy o f the pre-installed operating system. This
backup copy can be used later to restore your notebook to its delivery con figuration.
We strongly recomme nd that, as soon as possible after purchasing
your equipment, you create a backup copy on DVD of the pre-installed
operating system i n its delivery configuration.
If you have forgotten an operating system password which has been assigned, without
previously having saved the operating system, recreation of the necessary data
media and return t o the factory default setup will no longer be possible.
You can find further information on how to restore the operating system, drivers,
manuals and special software in the "Recovery Process" manual.
Your operating system is pre-installed on the hard disk to help you when you
start using your notebook for the first time.
1
► Switch the notebook on (1).
► During installation, follow the on-screen instructions.

Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will find additional
information on the system and drivers, help programmes, updates, manuals etc. on
your notebook or on the Internet at "www.fujitsu-siemens.com/support".
8 - English 10601002312, edition 1