Operation Manual

Troubleshooting and tips
54 10600448362
Mouse is not connected
► Switch the notebook off.
► Check whether the mouse cable is correctly connected to the notebook.
If you use an adapter or extension lead with the mouse cable, check the connections.
► Switch the notebook on.
The printer does not print
► Make sure that the printer is switched on and is on-line (see the manuals supplied with the
printer).
► Check that the cable connecting the notebook and the printer is connected properly.
► Check that the correct printer driver is installed.
The DVD film does not continue to play
Should the picture freeze when playing some DVD films, deactivate the accelerated hardware
decryption (it is activated in the default setting; this can be recognised from the checkmark in the
corresponding checkbox).
► Open the drive tray.
► Place the DVD in the drive tray with the label facing upwards.
► Push in the drive tray until you feel it lock into place.
► Wait until the WinDVD starts.
► Press the right mouse button or touchpad key.
A context menu appears.
► Click on Configuration and then on Video.
► Click on the checkmark in the checkbox of Hardware Acceleration.
The checkmark disappears.
► Click on OK.
The function is now deactivated.
Acoustic warnings
A beep sounds every few seconds
The battery is almost flat.
► Charge the battery.