Technical data

Operation
Configuring function settings in the Advanced menu
Open the Advanced s e ttings window
DDC/CI
Activate/deactivate the DDC/CI function
On = The DDC/C I function is activated (standard setting)
Off = The DDC/CI function is deactivated
Resolution Notifier
Monitor information. The optimum resolution for this monitor is 1280 x 1024
pixels.
When the function is active (On), a message will appear on the monitor after
approx. 30 seconds if a different resolution is set.
Change the resolution to 1280 x 1024 to achie ve optimum picture quality.
When the function is deactivated (Off), no messages will appear.
Factory Recall
Activate the factory settings
This function is used to reset all settings to the factory settings. The user is
not prompted to confirm the changes.
Press the
SELECT/MENU
button to activate the function. The Auto
Processing message will be displayed.
Displaying information
Call the Information setting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal and polarity of the synchronisation signal are
displayed.
20 A26361-K1338-Z220-1-7619, edition 1